Full face rubber expansion joint is also called large flanged flexible rubber joint, and the end face is fully sealed rubber joint.

The product is characterized in that the flange and the end surface of the sphere are all in contact with each other, which not only increases the high pressure resistance of the product. It also played a good role in preventing pull-off.

Product structure of end-face fully sealed rubber joint

Full face rubber expansion joint adopts the flat welding flange, while the ordinary rubber joint adopts the slotted flange. In addition, the edges of the full face rubber expansion joint are the same as the outer edge of the flange, and the flange is installed when the bolt is installed. It is installed inside the edge of the sphere, which greatly increases the pressure resistance, and can generally reach 2.5Mpa or 4.0Mpa. Full face rubber expansion joints are mainly used in the general connection of pipelines or pipelines with displacement requirements, which can play a role in limiting the displacement.

Product characteristics of end-face fully sealed rubber joint

High quality custom-made expansion joints supplied with split or fixed steel backing flanges. The full face flanges are integral with the body of the joint and drilled to conform the bolt pattern of the companion flanges of the pipe line.

Rubber bellows: Reinforced EPDM,Nitrile, Viton, etc.

Flanges: painted carbon steel as standard. Also available in hot dip galvanized carbon steel, stainless steel, etc.
Drilled to EN, ANSI, AWWA, JIS standards or any specific dimension.

For vacuum applications, an internal vacuum ring is incorporated.

Factory Stock

Package

About our factory:

We are a rubber expansion joint factory.

(1) Our raw materials can provide material certificates and the quality is guaranteed.

(2) Rubber is produced strictly according to customer requirements and the rubber raw materials are not changed.

(3) There is no outer rubber layer after vulcanization, forming a whole. The middle layer is made of polyester cord, all mesh. The connecting layer is thick and has strong pressure bearing capacity.

(4) After the finished product is produced, we have professional inspectors to inspect, remove burrs, and eliminate defective products.

(5) The sphere can be affixed with a vulcanization label according to customer requirements. If you need your own brand, support customized molds.

(6) If the sphere is a special length, it can also be customized.