Wet Proof Anti Interference High Frequency Spark Tester , Cable Testing Device
Specifications:
Test Voltage:1.0~15.0KV. Cable Diameter: 0~25mm. Output Frequency: 2.5-3.5KHz normal. Fast recovery time after fault (0.1s)
The Sine Wave Spark Tester is a fast and reliable instrument used in distinguish wire faults and detecting bare wires. Its high-speed fault detection feature gives you prompt information without worsening the condition of the wire after the test.
The use of high frequency (3KHz) enables a traditional commercial power frequency bead chain electrode to be shortened to 120mm HS015E Model.
The Sine Wave Spark Tester is quality-assured to meet your needs.
Basic Function
Basic Specification:
Specification | ZL-1007 High Frequency Spark Tester For Cable |
Output Voltage | 0.0~15.0KV R.M.S. |
Test Voltage | 1.0~15.0KV R.M.S. |
Cable Diameter | 0~25mm |
Maximum Load Current | 4mA Resistive,40mA Capacitive |
Output Frequency | 2.5-3.5KHznormal |
Electrode lengths | Bead Chain 120mm |
Fault Indication | Indicating lamp,Counting by Digital Counter |
Output Control | 1 Form C relay Contacts(220VAC/5A)for all wire faults and bare wire faults detected |
Input Control | SP1, SP2 input interlock control |
Operating Model | Extruder Continuous Application |
Power Source | 175~264 Volts, 180VA, Single phase, 50/60 Hz |
Operation Temperature | +4~45°C |
Operation Humidity | <90%RH |
Signal Cable Lengths | 5M |
Weight | Control Unit =5 kgs, Electrode = 8.5 kgs |
Dimension Controller | 360(L)x485(W)x90(H) mm |
Gauge Head | 330(L)x200(W)x390(H) |
Line Speed | 2000 M/min. maximum* |
*Follow UL 44, any point on the wire being traveled for not less than a total of 18 positive or negative crests of the supplied voltage.