Automatic Interface Tension Tester For Chemical , Petroleum , Electricity , Railway

Product Overview:

The platinum ring method is a traditional test method, which takes about 70 years. It is made of a platinum wire having a diameter of 0.37 mm and a ring having a circumference of 60 mm. During the test, the platinum ring is immersed in the liquid surface (or two non-mixed interfaces) for 2-3 mm, and then the platinum ring is slowly lifted upward, and a film is formed between the ring and the liquid surface. The membrane has a pull-down force on the platinum ring, measuring the maximum force applied to the ring during the entire platinum ring lift process, and then converting it to a true surface (interface) tension value.

The automatic interface tension measuring instrument is based on the principle of [Platinum Ring Method] to measure the surface tension value of precise liquid. The instrument integrates a number of advanced technologies and is widely used in chemical, petroleum, electric power, scientific research, railway and other industries.

The main function:

1. Fully automatic measurement of sample tension value using a powerful new generation microprocessor;

2 .8 inch 65K (resolution 800*600) color touch LCD display, Chinese and English prompt menu operation;

3 .The appearance surface is treated by electrostatic spray, anti-corrosion and easy to clean;

4 .With 25 °C automatic temperature compensation function, it solves the influence of temperature on the measured tension value;

5. The instrument automatically zeros, automatically measures, calculates, displays the experimental results, and has a power-down storage function;

6 .The instrument lifting platform is automatically raised and lowered, stable, low noise and accurate;

7.Using a magnetic can-closed sensor, using equal-interval multi-point calibration, the repeatability and reproducibility of measurement results are improved;

Standards:

GB6541-1986 "Determination of oil-to-water interface tension of petroleum products" (circle method)

ISO 6295-1983 "Determination of interface tension of petroleum products and mineral lubricating oils to water"

JB/T 9388-1997 "Technical conditions for interface tension meter"

ISO1409-1995 "Determination of surface tension of plastics, rubbers, polymer dispersions and latexes

SH/T1156-92 "Synthetic latex surface tension measurement method"

GB/T 5549ISO 304-1985 "Surface Determination of Surface Tension by Surfing Liquid Membrane Method"

Standard requirements for ISO 4311-1979 "Methods for the determination of surface tension by anionic and nonionic surfactant rings".

GB/T 22237-2008 Surface active agents Determination of surface tension

JB/T 18396-2001 Natural latex Determination of surface tension by ring method

ISO14090-82, ASTM D1417, EN14370, ZB2025-93, GB2960-82 and other standards.

Main Specifications: