5 inch SPI interface TFT LCD, Automotive Grade 5 inch Display

SAEF TECHNOLOGY SFTO500HQ-7012A-N is a 5 inch full TFT-LCD display with 800x480 resolution (800 horizontal by 480 vertical pixels array). It can be used in embedded systems, automation, medical equipment, industrial device, security equipment which requires TFT display in high quality and colorful image. SFTO500HQ-7012A-N is a IPS-LCD type TFT with brightness 500 - 1000 cd/m2 (typical value). It can be operating at temperatures from -30℃ to +85℃.

5 inch SPI interface TFT LCD, Automotive Grade 5 inch Display Drawing

5 inch SPI interface TFT LCD, Automotive Grade 5 inch Display Product Image

Pin definition:

J1&J2 Interface Description

Pin1~2, VCC5V / Power supply / Module Power supply (5V Typ.)

Pin3~4, GND / Power supply / Power ground

Pin5, LCD_CS / I / Chip Select pin for 3-wire serial I/F.

Pin6, NC / - / No connection

Pin7, LCD_SCLK / I / Clock of 3-wire serial I/F.

Pin8, LCD_INT / O / The interrupt output for host to indicate the status.

Pin9, LCD_RST / I / This is an active low Reset pin for LCD.

Pin10, LCD_SDA / I/O / Bi-direction data pin of 3-wire SPI I/F.

Pin11, CTP_INT(NC) / O / CTP External interrupt to the host

Pin12, CTP_SCL(NC) / I / CTP I2C clock input

Pin13, CTP_SDA(NC) / I/O / CTP I2C data input and output

Pin14, CTP_RST(NC) / I / CTP external reset signal, Low is active

Pin15, NC / - / No connection

Pin16, GND / Power supply / Power ground

Pin17, NC / - / No connection

Pin18, NC / - / No connection

Pin19, NC / - / No connection

Pin20, GND / Power supply / Power ground

J3 Interface Description (SPI Flash burning interface)

Pin1, SF_CLK / I / Serial Clock Input

Pin2, SF_DI / I / Data Input

Pin3, SF_DO / O / Data output

Pin4, SF_CS / I / Chip Select Input

Pin5, LCD_RST / I / LCD RESET signal. This pin must be pull low

Pin6, GND / Power supply / Power ground

Pin7, NC / - / No connection

Pin8, NC / - / No connection

Pin9~10, 3.3V / Power supply / Power supply for the SPI Flash (3.3V Typ.)