High PPI 4" TFT, 4 inch MIPI TFT LCD 540*1080 Dots Product Introduction
SAEF TECHNOLOGY SF-TO400AS-8986A-N is a 4 inch full TFT-LCD display with 540 (RGB)X 1080 dots (540 horizontal by 1080 vertical pixels array). The supply voltage (VCC) of driving LCD panel is from is 2.4V to 3.3V, typical voltage is 2.8V. and supporting MIPI interface. It can be used in embedded systems, automation, GPS, medical equipment, industrial device, smart home, security equipment which requires TFT display in high quality and colorful image.
SF-TO400AS-8986A-N is an IPS-LCD type ( IPS means In-plane Switching) TFT with brightness 350 cd/m2 (typical value). the brightness can be customized achieving 1000 nits. pls contact our sales for more details. It can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.
Product: | 4" Inch IPS TFT LCD | Resolution: | 540x1080 Pixels |
---|---|---|---|
Viewing Direction: | IPS All Viewing Angles | Touch Screen: | Without, Resistive And PCAP Optional |
Cover Lens: | Can Be Customized | Surface Luminance: | 350 Cd/m2 ( Customizable) |
Interface: | MIPI (Customizable) | Pin Number: | 30 Pins |
Connection: | Connector Type ( Customizable) | Driver IC: | ST7703 |
Operating Temp.: | -20℃ To +70℃ | Compliance: | REACH & RoHS Compliant |
High PPI TFT 4", 4 inch MIPI TFT LCD 540*1080 Dots Product Drawing
NO | SYMBOL | FUNCTION |
1 | RST_LCM | This signal will reset the device and it must be applied to properly initialize the chip. Signal is active low. |
2 | TE_LCM | Tearing effect signal is used to synchronize MCU to frame memory writing. |
3 | GND | Power Ground |
4 | TDP0 | MIPI Data Lane |
5 | TDN0 | MIPI Data Lane |
6 | GND | Power Ground |
7 | TDP1 | MIPI Data Lane |
8 | TDN1 | MIPI Data Lane |
9 | GND | Power Ground |
10 | TDP2 | MIPI Data Lane |
11 | TDN2 | MIPI Data Lane |
12 | GND | Power Ground |
13 | TDP3 | MIPI Data Lane |
14 | TDN3 | MIPI Data Lane |
15 | GND | Power Ground |
16 | TCP | MIPI Clk |
17 | TCN | MIPI Clk |
18 | GND | Power Ground |
19 | IOVCC1.8V | Power Supply for I/O system. IOVCC= 1.65V~3.3V. |
20 | LEDA | LED Anode |
21 | LEDK | LED Cathode |
22 | ID1 | ID |
23 | NC | NC |
24 | VDD2V8 | Power Supply for Analog, VDD=2.5V~3.3V. |
25 | NC | NC |
26 | SDA_CTP | I²C data signal of Touch Panel;If no used ,let this pin open. |
27 | SCL_CTP | I²C clock signal of Touch Panel;If no used ,let this pin open. |
28 | EINT_CTP | Interrupt signal to main processor of Touch Panel;If no used ,let this pin open. |
29 | RST_CTP | System reset of Touch Panel;If no used ,let this pin open. |
30 | VDD2.8_CTP | Power Supply for Analog, VDD=2.4V~3.3V. |
Item | Symbol | Min. | Max. | Unit | |
Supply Voltage | Power supply | VDD | -0.3 | +4.6 | V |
Analog | – | – | – | V | |
IO | IOVDD | -0.3 | +4.6 | V | |
Input Voltage | Vi | -0.3 | IOVDD+0.3 | V | |
Storage temperature | Tstg | -30 | +70 | ºC | |
Operating temperature | Top | -20 | +60 | ºC | |
Storage humidity | Hstg | 10 | Note 1 | %RH | |
Operating humidity | Hop | 10 | Note 1 | %RH |
Item | Symbol | Min. | Typ. | Max. | Unit | |
Supply Voltage | Power supply | VDD | 2.4 | 2.8 | 3.3 | V |
Analog | VCI | 2.4 | 2.8 | 3.3 | V | |
IO | IOVDD | 1.65 | 1.8/2.8 | 3.3 | V | |
Logic Low input voltage | VIL | -0.3IOVDD | – | 0.3IOVDD | V | |
Logic High input voltage | VIH | 0.7IOVDD | – | IOVDD | V | |
Logic Low output voltage | VOL | – | – | 0.2IOVDD | V | |
Logic High output voltage | VOH | 0.8IOVDD | – | – | V | |
Current Consumption | Normal display | Ivdd | – | 50 | – | mA |
Standby mode | Ivdd | – | 30 | – | uA | |
Frame Frequency | fFR | – | 60 | – | Hz |
High PPI TFT 4", 4 inch MIPI TFT LCD 540*1080 Dots Product Image
Search keyword: tft 4", 4 tft lcd, 4" tft lcd, 4 inch tft lcd, tft lcd 4, 4 tft display, 4" tft display, 4 inch tft display, tft display 4 inch, tft display 4", 4 inch tft lcd display, 4" tft screen, 4 inch tft screen, tft screen 4 inch, tft screen 4", 4 inch tft lcd screen, 540x1080 IPS TFT, 4 inch IPS, 4 inch 540x1080, High PPI LCD