MachineU > China Products > Service Equipment > Digital Signage > Digital Signage and Displays
128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer
128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer
128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer
128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer
Specifications
Brand Name :
SAEF
Model Number :
SFBM12864YB057A
Certification :
ISO9001 / ISO14000
Place of Origin :
ShenZhen / China
MOQ :
3 pcs
Price :
Negotiable based on order lot quantity
Payment Terms :
L/C, , T/T, Western Union
Supply Ability :
3000K pcs per month
Delivery Time :
1-5 weeks
Packaging Details :
Standard Exportation Package
Product :
Standard 128x64 LCM
Resolution :
128x64 dots
View Direction :
6 O'clock
LCD Type :
FSTN, Positive
Polarizer Type :
Transflective
Module Size :
40.0L×28.0W×4.5（max）H
Viewing Area :
37.0×20.0 mm
Driver IC :
ST7567
Pin number :
28 pins
Interfaces :
6800-Series OR 8080 Series MPU
Operating Temp :
-20°C to +70°C
Supply Voltage :
3.3V(Typical Value)
Life Time :
40,000 hours
Compliance :
REACH & RoHS Compliant
Description

Features

  • Dot Matrix: 128×64 Dots
  • LCD Mode: FSTN/NEGATIVE/TRANSFLECTIVE
  • Controller IC:ST7565
  • Driving Method: 1/65 Duty; 1/9 Bias
  • Viewing Angie: 6 O’clock direction
  • Interface: 6800-Series OR 8080 Series MPU
  • Operating voltage: 3.0V
  • Operating Temperature Range: -20 to +70℃
  • Storage Temperature Range : -30 to +80℃
  • Backlight Speciality : Led(3PCS) Vf=3.0±0.2V ,IF=45MA

Mechanical Specifications

ITEM SPECIFICATIONS UNIT
Module Size(L×W×H) 40.0L×28.0.0W×4.5(max)H mm
View Area(W×H) 37.0×20.0 mm
Effective Area 128×64 dot
Dot Pitch(W×H) 0.27×0.27 mm
Dot Size(W×H) 0.245×0.245 mm

Drawing

128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer

Pin Definition

ITEM SYMBOL LEVEL FUNCTION
1 VDD +3.3V Power Supply For Logic
2 C86 H/L H:6800 Parallel L:8080 Parallel
3 VSS 0V Power Ground
4 V0 —

Connect a capacitor between this terminal and the VSS terminal
5 V1 —
6 V2 —
7 V3 —
8 V4 —
9 CAP2- — Connect a capacitor between this terminal and the CAP2+ terminal
10 CAP2+ — Connect a capacitor between this terminal and the CAP2- terminal
11 CAP1- — Connect a capacitor between this terminal and the CAP1- terminal
12 CAP1+ Connect a capacitor between this terminal and the CAP1+ terminal
13 CAP3+ — Connect a capacitor between this terminal and the CAP1- terminal
14 VOUT Connect a capacitor between this terminal and the VSS or VDD terminal
15 VSS 0V Power Ground

16

~

23

D7~D0

H/L

8-bit bi-directional data bus

24

/RD

H/L

8080 Parallel:The data bus is in an output status when this signal is “L ”.

6800 Paralle:This is the enable clock input terminal of the 6800 Series MPU.

25

/WR

H/L

8080 Parallel:The signals on the data bus are latched at the rising edge of the /WR signal.

6800 Paralle:H:Read L:Write
26 A0 H/L

H:Indicates that D0 to D7 are display data.

L:Indicates that D0 to D7 are control data.
27 /RES H/L The reset operation is performed by the /RES signal level
28 CS1 L Chip select signal

Display Data RAM (DDRAM)

The Display Data RAM stores pixel data for the LCD. It is 64-row by 128-column addressable array. Each pixel can be selected when the page and column addresses are specified. The 64 rows are divided into 8 pages (Page 0~Page 7) of 8lines . Data is written to the 8 lines of each page directly through D0 to D7. The display data of D0 to D7 from the microprocessor correspond to the LCD common lines. The LCD controller and MPU interface operate independently, data can be written into RAM at the same time when data is being displayed without flicker on LCD.

Page Address Circuit

This circuit is for providing a Page Address to Display Data RAM. It incorporates 4-bit Page Address register changed by only the “Set Page Address” instruction. The Page Address must be set before accessing DDRAM content. Page Address “8” is a special RAM area for the icons and display data D0 is only valid.

Column Address Circuit

Column Address Circuit has a 8-bit preset counter that provides Column Address to the Display Data RAM (DDRAM). The DDRAM column address is specified by the“Set Column Address ” command. The specified column address is incremented (+1) with each display data read/write access. This allows the MPU display data to be accessed continuously. Control flag MY can invert the output order of the COM pads. And the MX flag makes it possible to invert the relationship between the Column Address and the SEG outputs. It is necessary to rewrite the display data into DDRAM after changing MX flag setting. Please refer to ST7565 datasheet.

Facilities and Certification

128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer

Send your message to this supplier
Send Now

128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer

Ask Latest Price
Product Detail
Brand Name :
SAEF
Model Number :
SFBM12864YB057A
Certification :
ISO9001 / ISO14000
Place of Origin :
ShenZhen / China
MOQ :
3 pcs
Price :
Negotiable based on order lot quantity
Contact Supplier
128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer
128x64 FSTN Graphic LCD Display Positive LCD 12864 Dots LCD Manufacturer

Shenzhen Saef Technology Ltd.

Verified Supplier
4 Years
shenzhen
Since 2007
Business Type :
Manufacturer
Main Products :
OLED Display Module, TFT LCD Display, PCAP TFT Display
Total Annual :
40000000-50000000
Employee Number :
400~500
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Monochrome Graphic LCD Display
MachineU China Products Service Equipment Digital Signage Digital Signage and Displays
Contact Supplier
Submit Requirement