MachineU > China Products > Electrical Equipment & Supplies
Metalized Polypropylene Film Capacitor , Medium Power Square MKP X2 Capacitor
Metalized Polypropylene Film Capacitor , Medium Power Square MKP X2 Capacitor
Specifications
Brand Name :
CG
Model Number :
X2 Safety Capacitor
Certification :
VDE，CQC
Place of Origin :
Dong Guan
MOQ :
10000 Pieces
Price :
Discuss
Payment Terms :
T/T
Supply Ability :
100000000 Pieces
Delivery Time :
15-21 work days
Packaging Details :
200pcs/ bag,carton size:45cm*31cm*34cm,inner box:29.2cm*21cm*31.3cm,a carton inside two inner boxs , 4000pcs/ box
Keyword :
X2 Safety Capacitor
Capacitance: :
0.1 UF
Rated Voltage: :
250-310V
Model Number:: :
MKP X2
Operating Temperature :
-40℃～+110℃
Application :
Widely Used In Across-the-line,interference Suprression Circuit,motor, Fan, Air Conditioner Etc.
Capacitance Tolerance :
±10%(K),±20%(M)
Material: :
Metallized Polypropylene Structure
Description

Metallized Capacitor Film Plastic Case Class X2 Safety Capacitor Medium Power Square Capacitor​

Products Introduction

MPX are winded with metallized polypropylene film dielectric,Non-inductive construction, tinned copper wire leads,and flame retardant epoxy resin coating. They have excellent features of self-healing and good flame retardant according to UL 94-V0
Construction and main materials of products

NO.Main MaterialsSpecificationRemark
1Metallized polypropylene FilmMPPZAH or MPPA(5～12μm)---
2Zn,Sn lineZn or Zn and Sn alloy---
3TerminalCu(Copper wire) (Φ0.55 or 0.75mm)±0.05mm
4Sealed MaterialEpoxy resinUL94-V0
5Plastic CasePBTUL94-V0

Note:All of the Materials are in compliance with the requirements of ROHS AND REACH.
Type application

The Products Would widely used for the Interference suppressors and across-the-line capacitor applications.Suitable for used in situations where failure of the capacitor will not lead to danger of electric shock.
Features

1 Non-induction construction
2 High moisture-resistance
3 Self-healing property
4 Flame retardant type(compliance with UL 94V-0)
5 Very small loss
6 Excellent frequency and temperature characteristics
7 High insulation resistance

Electrical specifications

Unless otherwise specified,electric characteristics shall refer to IEC 60384-14:2005

ItemCharacteristic requirementTest method&Condition
Climatic Category40/110/56
Passive Flammability ClassB
Operating Temperature-40℃～+110℃
Capacitance Range0.0022μF～2.2μF
Capacitance Tolerance±10%(K),±20%(M)1KHz ,1.0Vrms ,25℃
Rated Voltage250VAC/275VAC/300VAC/305VAC/310VAC
Dissipation Factor1KHz<0.10%IR≥6000s
Insulation ResistanceC≤0.33μFC>0.33μFUR＞100V,100VDC,
IR≥15000MΩIR≥6000s60S,20℃
Withstand voltage Between TerminalsNo permanent breakdown or flashover4.3UR(d.c) 60s 25℃Cut off Current 10mA
Withstand voltage Between Terminals and CaseNo permanent breakdown or flashover2UR+1500V(a.c) 60s 25℃ ≥2000V(a.c) 25℃
MAX. Pulse rise time (dv/dt)Lead spacing
7.5mm10mm15mm22.5mm27.5mm37.5mm
600V/μs500V/μs400V/μs200V/μs150V/μs100V/μs

Marking

1. CIGU logo:
2. Capacitance:(104K ,0.1μF)
3. Capacitance Tolerance:(K)±10%
4. Rated Voltage:250,275,300,305,310VAC
5. Product Class:X2
6. Product type: MPX
7. Climatic Category: 40/110/56
8. Passive Flammability Class:B
9. China approvals mark:CQC
10. Germany approvals mark:VDE
11. ENEC approvals mark:ENEC
12. American approvals mark:CUL
13. Approval standard:IEC60384-14

8. Approvals

NO.CountryApproval standardFile No.Rated Voltage
1ChinaCQCIEC60384-14:2005CQC19001219393275VAC
2GermanyVDEIEC60384-14:201340050231250VAC 275VAC 300VAC 305VAC 310VAC
3European UnionENECIEC60384-14:201340050234
4USA CanadaULIEC60384-14:2005E481614


Storage conditions

1 t should be noted that the solderability of the terminals may be deteriorted when stored barely in an atmosphere for a long preriods
2 It shouldn't be located in particularly high temperature and high humidity, it must submit to the following conditions(keeping in the original package)
Temperature: 35℃ MAX Relative humidity:60% MAX
3 Storage period:Losse:12 monthes max (from the manufacturing date marked on the label in package bag)

Specifications(IEC 60384-14)

Test itemsPerformance requirementsConditions of test
CapacitanceWithin the tolerance specified1KHz, 1Vrms Max. at 25℃
Dissipation Factor0.001 (0.1%) Max.1KHz, 1Vrms Max. at 25℃
Voltage proofShall be no abnormalityBetween terminals 4.3UR (Vdc) Test of 60sec.
Between terminal and enclosure UR×200％+1500Vac, 60sec.
Insulation resistanceCR ≤ 0.33μF IR ≥ 15,000MΩ CR >0.33μF IR ≥6,000s100±15Vdc, 60sec / 25℃
Robustness of terminationsNo wire breakage and no damage of capacitor

Tense Strength of Terminal Load Force : 1.0 Kg
Holding Time : 10 ± 1sec

Bending Strength of Terminal Load Force : 0.5 Kg
Bending Time : 4 x 90 ﾟ

Resistance to soldering heat

(1) Appearance : No visible damage
(2) △C/C : ≤ ±5% of the initial value

Solder temperature: 260±5℃
Solder time: 5±0.5sec

Solderability95% of the surface tinning

Solder temperature: 260±5℃
Solder time: 2±0.5sec

Rapid change of temperatureThe capacitors shall be visually examined and there shall be no visible damage.

Lower category temperature: -40℃
Upper category temperature: 110℃
Number of cycles: 5
Duration t1 = 30 min

VibrationThe capacitors shall be visually examined and there shall be no visible damage

Frequency range: 10~55Hz
Course: X,Y,Z (axis)
2h / axis ( 6h in total)
Displacement amplitude: 0.75mm


Test itemsPerformance requirementsConditions of test
Climatic sequence

(1) Appearance : No visible damage
(2) △C/C : ≤ ±5% of the initial value
(3) DF ( tanδ) : ≤ 0.008 of increased value
(4) IR : ≥ 50% of the applicable limits
(5) Voltage proof : Normal

Dry Heat
Upper Temperature: 110℃
Lower Duration: 16Hrs

Cold
Temperature: -40℃
Duration: 2Hrs

Damp Heat Steady State

(1) Appearance : No visible damage
(2) △C/C : ≤ ±5% of the Initial value
(3) DF ( tanδ) : ≤ 0.008 of increased value
(4) IR : ≥ 50% of the applicable limits
(5) Voltage proof : Normal

+40°C and 93% RH, 56 days
Charge and discharge

(1) Appearance : No visible damage
(2) △C/C : ≤ ±10% of the initial value
(3) DF ( tanδ) : ≤ 0.008 of increased value
(4) IR : ≥ 50% of the applicable limits

Test voltage : √2 x URVAC 50 Hz
Charge and discharge: 0.5sec/time
Repeated for 10000 cycles

Endurance

(1) Appearance : No Visible Damage
(2) △C/C : ≤ ±10% of the initial value
(3) DF ( tanδ) : ≤ 0.008 of increased value
(4) IR : ≥ 50% of the applicable limits

1.25 x UR VAC 50 Hz, once every hour
increase to 1,000VAC for 0.1 second,
1,000 hours at upper rated temperature






















































































Send your message to this supplier
Send Now

Metalized Polypropylene Film Capacitor , Medium Power Square MKP X2 Capacitor

Ask Latest Price
Product Detail
Brand Name :
CG
Model Number :
X2 Safety Capacitor
Certification :
VDE，CQC
Place of Origin :
Dong Guan
MOQ :
10000 Pieces
Price :
Discuss
Contact Supplier
Metalized Polypropylene Film Capacitor , Medium Power Square MKP X2 Capacitor

Dongguan Chenglue Electronic co.,Ltd

Verified Supplier
3 Years
guangdong, dongguan
Business Type :
Manufacturer, Exporter, Trading Company, Seller
Main Products :
X2 Safety Capacitor, Y1 Safety Capacitor, Y2 Safety Capacitor
Total Annual :
5000000-10000000
Employee Number :
70~100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products X2 Safety Capacitor
MachineU China Products Electrical Equipment & Supplies
Contact Supplier
Submit Requirement