Air Conditioner NTC Temperature Sensor 5*25 5K 10K 15K 20K 50K Copper Head
Air conditioner NTC Temperature Sensor 5K, 10K, 15K, 20K, 50K copper head offers excellent reliability in a compact, cost-effective design. The sensor is also a proven performer for moisture protection and freeze-thaw cycling. Lead wires can be set to any length and color to match your requirements, The plastic shell can be made from Copper, Stainless Steal PBT , ABS, or most any material that you need for your application.
The internal thermistor element can be selected to meet any resistance - temperature curve and tolerance.
Application: Thrmistor temperature measurement for refrigerator, freezer, air conditioner, floor heating and other HVAC application, ect.
Characteristic:
1. Wide operating temperature range, good stability and reliability.
2. Easy to installation and manipulation as the sealing can be done according to environment
and conditions there it is applied by customer.
3. Accurate testing can reflect temperature change precisely.
4. Insulating resistance(MΩ): over 100MΩ at DC500 V
5. Working temperature range(°C): -10 to +105c
6. Dissipation factor(mw/°C): 1-2 (in still air)
Type | NTC(thermistor) Temperature Sensor |
Temperature range | -50℃ ~ +300℃;Customized |
Accurancy | 1%;5%;10% |
RT(25℃) | 1K;2K;2.2k;2.7k;3K;5K;7K;8K;12K;15K;20K;25K;30K;40K;47K;50K;60K;70K;100K;200K;230K;250K;470K;500K;1000K;Customized |
B value | 3274;3435;3470;3928;3950;3977;4100;4200;4400;Customized |
Probe Material | Stainless steel SS304; aluminum;copper;plastic;epoxy;glass |
Installation | Flanged;Surface;Threaded;Plastic;Straight;Film;Customized |
Wire Material | Heat shrinkable tube;PVC tube;glass fiber tube; teflon tube |
Connector | Molex;JST;DuPont;CWB;CJT;U type;Customized |
Waterproof | IP67;IP68 |
Advantages and characteristics of Auto Temperature Sensor
Reliability Test
Test Item | Test Standard | Test method | Performance requirements |
Zero Power Resistance | IEC 60539-1 | Immerse samples in the constant temperature bath at 25℃±0.005℃,test steady resistance | Resistance tol ±1% |
B value | IEC60539-1 | Immerse samples in the constant temperature bath at 25℃,50℃(or 85℃), test steady resistance,and calculate B value | Resistance tol ±1% |
Free fall | IEC60068-2-32 | Fall height: 1.5±0.1m,Surface: Cement , 1 time | No obvious damage, R25 △R/R≤±1% |
Insulation | IEC60539-1 | 500V pressure on insulation shell test insulation resistance | >500MOhm |
Withstand voltage | IEC60539-1 | Withstand voltage: 1500V/AC ,Leakage current:2mA Lasting: 60sec | No obvious damage |
Tension | IEC60068-2-21 | Pull uniform speed at the end, F>4.0KG(requested by customer) | No obvious damage, R25 △R/R≤±1% |
Vibration | Q/HBm 108-94 | Test frequency: 10~500Hz,swing: 1.2mm acceleration: 30m/s2 Direction X,Y,Z Time:8Hour/direction | No obvious damage, R25 △R/R≤±1% |
Steady humidity and heat | IEC60068-2-78 | Temp:40±2℃ Humidity:92-95%RH Time:1000±24Hour | No obvious damage, R25 △R/R≤±1% |
Thermal time constant | EC60539-1 | Immerse in 25℃ water,after thermal balance,immerse in 85℃,resistance arrives 63.2%,calculate total time | <10 sec |
High temperature storage | IEC60068-2-2 | Temp:125℃±5℃ Time: 1000±24Hour | No obvious damage, R25 △R/R≤±1% |
Cold and thermal shock | IEC60068-2-14 | -40℃~+125℃ T1:30min Cycle time:1000 | No obvious damage, R25 △R/R≤±1% |
Knock experiment | IEC60068-2-77 | Acceleration:250m/s2 Pulse lasting: 6ms Knock times: 1000 Recovery time: 2 Hour | No obvious damage, R25 △R/R≤±1% |
Low temperature storage | IEC60068-2-1 | Temp: 40±2℃ Time: 1000±24Hour | No obvious damage, R25 △R/R≤±1% |
Salt spray | IEC60068-2-11 | Temp: 35±2℃ Collection hour : 1.0mL~2.0mL Time: determine per as actual demand | No obvious damage, R25 △R/R≤±1% |