Low Loss Coated With Epoxy Resin 103M 300VAC Y2 Safety Capacitor Good Stability
The special feature of the safety Y2 capacitor is the capacity. All electronic products are specified according to the capacity, because it also needs temperature like people, and it is afraid of heat and cold. It needs to be measured under a certain normal temperature and humidity. Out of its standard capacity, The safety Y2 capacitor powder is evenly coated, the appearance is smooth and crystal clear, small and beautiful.
The difference between Y1 capacitor and Y2 capacitor
1. The withstand voltage and pitch are different
The rated voltage of the Y1 capacitor is 400VAC and the withstand voltage can reach 4000VAC
The rated voltage of the Y2 capacitor is 300VAC and the withstand voltage can reach 2600VAC
The conventional pitch of Y1 capacitor is 10mm
The conventional pitch of Y2 capacitor is 7.5mm
2. Different types of insulation
The Y1 capacitor belongs to double insulation or reinforced insulation
The Y2 capacitor belongs to basic insulation or supplementary insulation
Features:
Meeting various countries' safety standards
Compact structure
Cost-efficient
Coated with epoxy resin
Application:
1. It is suitable for noise suppression circuit of power supply circuit of electronic equipment
2. Can be used in antenna coupling and bypass circuit
3. Control panel of various small household appliances
4. Power filter
5. High frequency AC load
6. Switching power supply
7. Electronic ballast
8. LED bulbs
Specification Reference Standard | IEC 60384-14 ; EN 60384-14 ; IEC UL60384 ; K 60384 |
Approved Monogram | VDE / ENEC / IEC / UL / CSA / KC / CQC |
Subclass ; Rated Voltage(UR) | X1 / Y1/Y2 ; 400VAC / 300VAC/500VAC |
Capacitance Range | 10pF to 10000pF |
Voltage Proof | 4000VAC for 1min/2000VAC for 1min/1800VAC for 1min |
Capacitance Tolerance | Y5P±10%(K) ; Y5U,Y5V±20%(M) measured at 25℃,1Vrms,1KHz |
Dissipation Factor (tgδ) | Y5P,Y5U tgδ≤2.5% ; Y5V tgδ≤5% measured at 25℃,1Vrms,1KHz |
Insulation Resistance(IR) | IR≥10000MΩ,1min,100VDC |
Operating Temperature | -40℃ to +85℃ ; -40℃ to +125℃ |
Temperature Characteristic | Y5P,Y5U,Y5V |
Flame Retardant Epoxy | UL94-V0 |
model | width | thickness | foot spacing | lead | Voltage | capacity | material | Tolerance |
Y2-103M-Y5V | φ13mm | T3.8mm | F10mm | L3-22mm | 300V[**]C | 10000pF | Y5V | ±20% |
Y2-472M-Y5V | φ9.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 4700pF | Y5V | ±20% |
Y2-332M-Y5V | φ8.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 3300pF | Y5V | ±20% |
Y2-222M-Y5V | φ7.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 2200pF | Y5V | ±20% |
Y2-152M-Y5V | φ6.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 1500pF | Y5V | ±20% |
Y2-102M-Y5V | φ6.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 1000pF | Y5V | ±20% |
Y2-472M-Y5U | φ13mm | T3.8mm | F10mm | L3-22mm | 300V[**]C | 4700pF | Y5U | ±20% |
Y2-332M-Y5U | φ11mm | T3.8mm | F10mm | L3-22mm | 300V[**]C | 3300pF | Y5U | ±20% |
Y2-222M-Y5U | φ8.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 2200pF | Y5U | ±20% |
Y2-152M-Y5U | φ8.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 1500pF | Y5U | ±20% |
Y2-102M-Y5U | φ7.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 1000pF | Y5U | ±20% |
Y2-821K-Y5U | φ7.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 820pF | Y5U | ±10% |
Y2-681K-Y5U | φ6.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 680pF | Y5U | ±10% |
Y2-561K-Y5U | φ6.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 560pF | Y5U | ±10% |
Y2-471K-Y5U | φ6.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 470pF | Y5U | ±10% |
Y2-102K-Y5P | φ10mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 1000pF | Y5P | ±10% |
Y2-821K-Y5P | φ10mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 820pF | Y5P | ±10% |
Y2-681K-Y5P | φ8.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 680pF | Y5P | ±10% |
Y2-561K-Y5P | φ8mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 560pF | Y5P | ±10% |
Y2-471K-Y5P | φ7.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 470pF | Y5P | ±10% |
Y2-331K-Y5P | φ6.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 330pF | Y5P | ±10% |
Y2-221K-Y5P | φ6.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 220pF | Y5P | ±10% |
Y2-151K-Y5P | φ6.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 150pF | Y5P | ±10% |
Y2-101K-Y5P | φ6.5mm | T3.8mm | F7.5mm | L3-22mm | 300V[**]C | 100pF | Y5P | ±10% |
Production Process
Product structure
Product Usage
Q: What is the lead time ? |
A: Honestly, it depends on the order quantity and the season you place the order.Usually it takes 10-15 working days in normal season. |
Q: What is the Samples time ? |
A: Usually we quote within 24 hours after we get inquiry.If you are very urgent to get the price, please call us so that we will quote you as early as possible. |
Q: Is OEM service available? |
A: Yes, we can provide customers brand printing as well as capacitor design.etc. |