50Kg Bag Corn Automatic Weighing And Packing Machine Lines
Technical Parameters
Model Series | SXP50G |
Packable Products | granules/ powders/flake particles |
Bag Type | PE bags/ aluminum foil bags/ woven bags/ paper bags/ paper-plastic composite bags etc. |
Roll Film | Diameter of roll film≤1500mm, inner tube of roll film: 150mm (6 inches) |
Empty Bag Size | L(500-750mm), W(320-420mm) |
Packaging Weight | 20-50 kg/bag |
Packaging Speed | 300~600 bags/h |
Power | 3 kW |
Air Consumption | 200 NL/min |
Machine Features
1. The whole line is customized according to customer’s specific needs and workroom present situation to make sure all the machine suit well for the customer;
2. The machine unit line adopts famous brand electrical parts like Mettler Toledo load cell / Banner Vacuum Generator / SMC Valve / Siemens PLC & Touch Screen etc. To ensure good machine performance for customer;
3.The main packing machine shall be equipped with safe door and the robot hand shall be equipped with safety guard to ensure the worker’s safety;
4. The whole machine line shall build up a controlling cabinet for the connecting of all the machine lines;
5. The whole machine line just require one to two person for operating & normal checking which greatly save the labor cost for the customer and increase the production efficiency
Precautions for use
Notice: use specified supply voltage, this machine adopts single-phase 3-wire (AC380V, 50Hz), it shall be avoided to roll press the power line and the power line shall be rolled with hands when it is not used;
Notice: please keep the equipment clean inside and outside and avoid moisture;
Notice: please do not change any part on the machine;
Notice: before formal startup, be sure to confirm that each switch parameter operates normally, otherwise, the equipment may be damaged;
Notice: before formal startup, if the specification needs to be changed, please perform operation in strict accordance with the specification change steps, otherwise, the equipment may be damaged;
Notice: please do not place moist and dirty articles on the equipment deck.
Machine main parts list (subject to actual configuration)
No. | Name | Brand |
1 | Vacuum pump | Shanghai Zhongde |
2 | Cylinder | Japan SMC |
3 | Solenoid Valve | Japan SMC |
4 | Other pneumatic components | Japan SMC |
5 | Normal Motor | CPG |
6 | Servo Motor | Delta (Taiwan) |
7 | Heat sealing head | Dechao |
8 | PLC | Omron |
9 | Touch Screen | Weinview |
10 | Inverter | Delta (Taiwan) |
11 | Switching power supply | Schneider (France) |
12 | Switch | Schneider (France) |
13 | Air switch | Schneider (France) |
14 | AC contactor | Schneider (France) |
15 | Motor circuit breaker | Schneider (France) |
16 | Thermal relay | Schneider (France) |
17 | Limit switch | Schneider (France) |
18 | Photoelectric | SICK |
19 | Load cell | Toledo (Sweden) |
Packaging and Delivery
* Machine packing inside is plastic films and outside is fumigation wooden case.
* Our wooden case is very strong; it can bear long time shipping on the sea.
* And machine with preservative film, it can stop the salt sea water enter into the machine and make the machine corrosion.
Each Parts Introduction
Our Promise
Installation:
1-We provide videos and instruction manual to show the process of installation.
2-We provide training for installation for free in our factory.
3-We can send technician to buyer's factory to install the machine and provide training service
After Sales Service:
1-One-year quality warranty and free lifetime technique support.
2-Free spare parts would be supplied if machine broken within warranty period.
3-After the warranty period, the spare parts for replacement are offered based on certain charge.
FAQ
Q: How do we test your machinery?
A: When the machine complete manufactured, we will send video for check, and you also can come to our factory to test and learn how to operate it.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance.
Payment>=1000USD, 30% T/T in advance, balance before shipment.