High ozone UV ultraviolet light beam odorous gas UV light oxygen air purifier

The high-ozone UV ultraviolet light beam used by the UV photo-oxygen air purifier illuminates the malodorous gas, and cracks the malodorous gases such as ammonia, trimethylamine, hydrogen sulfide, methyl sulfide, methyl mercaptan, methyl sulfide, dimethyl disulfide, carbon disulfide and benzene. Ethylene, sulfide H2S, VOC, benzene, toluene, xylene molecular bonds, so that the free state of the pollutant molecules and ozone oxidation combined into small molecules harmless or low-harm compounds, such as CO2, H2O and so on.

UV photo oxygen air purifier performance characteristics:

1, in addition to bad odor: can remove volatile organic compounds (VOC), inorganic substances, hydrogen sulfide, ammonia, mercaptans and other major pollutants, as well as a variety of bad odor, deodorization efficiency of up to 99%, deodorization effect is greatly More than the odor emission standard issued in 1993 (GB14554-93).

2, no need to add any substances: only need to set the corresponding exhaust duct and exhaust power, so that the malodorous gas is deodorized and purified by this equipment, without adding any substances to participate in the chemical reaction. ,

3, strong adaptability: It can adapt to high concentration, atmospheric quantity, deodorization and purification treatment of different malodorous gas substances, and can work continuously for 24 hours every day, and the operation is stable and reliable.

4. Low operating cost: This equipment has no mechanical action, no noise, no need for special personnel management and daily maintenance. It only needs regular inspection. The energy consumption of this equipment is low. (Each treatment is 1000 cubic meters per hour, only consumes about 0.2 degrees of electricity. Electric energy), the equipment wind resistance is extremely low <50pa, which can save a lot of exhaust power consumption.

5. No pretreatment: no special pretreatment is required for malodorous gases, such as heating and humidification. The working environment temperature of the equipment is between -30 °C and 95 °C, the humidity is between 30% and 98%, and the pH is at 2 13 can work normally.

Sixth, the equipment covers a small area, light weight: suitable for special conditions such as compact layout, narrow space, equipment area of ​​<1 square meters / processing 10000m3 / h air volume.