China 2019 popular Pulse single dust collector single machine

The components of the pulse single-machine dust collector include: a ash bucket, an upper tank body, a middle tank body, a lower tank body, and the like, and the upper, middle and lower tanks are compartment structures. The pulse single-stage dust collector is cleaned by the split-ventilation pulse, and the purpose of cleaning can be achieved by spraying once, so the cleaning cycle is prolonged, the energy consumption of cleaning is reduced, and the consumption of compressed gas can be greatly reduced. At the same time, the fatigue of the filter bag and the pulse valve is correspondingly reduced, thereby multiplying the life of the filter bag and the valve piece.

The pulse single-stage dust collector adopts the upper bag-picking method. After the bag is taken out of the bag, the dirty bag is put into the lower ash hopper of the box, and is taken out from the manhole, which improves the bag changing operation condition. The cabinet adopts airtight design, good sealing performance, excellent sealing material for inspection door, kerosene leak detection during production, and low air leakage rate.

When the pulse single-stage dust collector works, the dust-containing gas enters the ash hopper from the inlet duct, and the coarse dust particles directly fall into the bottom of the ash hopper. The fine dust particles enter the middle and lower tanks with the airflow turning, and the dust accumulates on the outer surface of the filter bag. The filtered gas enters the upper tank to the clean gas collecting pipe-exhaust duct, and is discharged to the atmosphere through the exhaust fan. The cleaning process is to cut off the clean air outlet duct of the chamber so that the bag of the chamber is in a state of no airflow. Then, the pulse valve is opened and the pulsed air is cleaned by the compressed air. The closing time of the shut-off valve is enough to ensure that the dust peeled off from the filter bag after the spray is settled to the ash hopper, and the dust is prevented from being separated from the air bag after being separated from the surface of the filter bag. The phenomenon of the surface of the adjacent filter bag is made to clean the filter bag, and the exhaust valve, the pulse valve and the ash discharge valve are fully controlled by the programmable pulse controller.

Pulse single-stage dust collector is a kind of pulse dust collector of our company. It belongs to small dust collector. At present, pulse single-machine dust collector is widely used. Welcome new and old customers to come to the company for consultation. We look forward to cooperating with you!

Our service:

1. Various shot blasting machine, eco-friendly dust collector, molding and core shooting equipment, sand processing line and automated modeling line.

2. We offer OEM&ODM service to meet all your requirements.

3. Engineeres are available to guide the installation and take care of other problems.

4. 12 months products warranty.