China factory supply cheap price DMC single pulse dust collector

DMC single-pulse dust collector is a commonly used environmental protection product. This product adopts single-row pulse cleaning of angle pulse valve. It features: strong cleaning ability, low emission concentration, low air leakage rate and high dust removal efficiency. This product has been widely used and has been widely used in cement plants in Anhui, Hebei, Shanxi and other places, and has been unanimously recognized and praised by users.

The DMC single-pulse dust collector is mainly composed of a box body, an air outlet system and a blowing system. So, what are the characteristics of each part? Here we briefly introduce:

(1) Enclosure: including bag room, clean air, perforated plate, filter bag, filter bag cage, inspection door, the design pressure of the box is 5000pa.

(2) Air outlet system: including fans and fans.

(3) Injection system: including air bag, blowing pipe, pulse valve, and control instrument.

DMC single-pulse dust collector is cleaned by the split-ventilation pulse, and the purpose of cleaning can be achieved by spraying once, so the cleaning cycle is prolonged, the energy consumption of cleaning is reduced, and the consumption of compressed gas can be greatly reduced. At the same time, the fatigue of the filter bag and the pulse valve is correspondingly reduced, thereby multiplying the life of the filter bag and the valve piece.

The cabinet of DMC single-pulse dust collector adopts airtight design, good sealing performance, excellent sealing material for inspection door, kerosene leak detection during production, and low air leakage rate. The inlet and outlet air passages are arranged compactly and the airflow resistance is small.

DMC single-pulse dust collector should pay attention to the dust concentration of the inlet when selecting the type. In terms of technical performance, the airflow velocity (ie, the filtering wind speed) of the filter bag is inversely proportional to the dust concentration of the gas.

The working principle of DMC single pulse dust collector is:

The dust-laden air enters the middle part of the dust collector box from the bottom of the dust collector. The coarse dust particles settle down by their own gravity and fall into the ash silo. The fine dust is adsorbed on the outer wall of the filter bag through various effects, and filtered through the filter bag. The purified air is discharged from the air outlet through the Venturi tube into the upper tank, and the dust adsorbed on the outer wall of the filter bag grows thicker with time, the resistance of the dust collector gradually increases, and the amount of gas to be treated is continuously reduced. In order to keep the precipitator in an effective working state and keep the pressure loss within the range, it is necessary to adsorb the ash deposited on the outside of the bag wall.

Why choose us?

1. Over 20 years experience in foundry machinery industry.

2. CE, ISO 9001 and Strict Production Guideline to guarantee the high quality of our products.

3. Factory and Competitive Price we offer.

4. Strong Research & Development technical team with more than 36 people of senior professor engineer and senior engineer.

5. Various machinery to meet all your needs at our factory.

6. Prompt and Professional reply regarding our products and service.

7. Hundreds of customers all around the world.