1. Description

950mm eps sandwich styrofoam block panel for construction buildings

2. Information

3. Feature

Light weight : 10-14 kg/m2 .

Easy to install

Short work cycle

High load bearing capacity

High -stiffness and intensity

Heat insulation

Sound insulation

Moisture proof

Avg . thermal conductivity : 0.032kcal / m

Length : as per requirement considering the transportation constraints

Thickness of steel sheet : 0.326mm , 0.376mm , 0.426mm , 0.476mm

Density : 10-25kg / m3

Color : any color

4. Introduction

Polystyrene(EPS) sandwich panel is a new type of construction panel which made of outer layer both side of prepainted steel coil and inner layer of polystyrene by computer -controlled color steel shaping machine and covered with high -strength adhesive .The connection can be two ways , one is drilling on the panel and jointing with bolts and nuts , the other is opening groove on the panel and connecting with bolts . Wall panel and roof tile has 50mm , 75mm , 100mm , 125mm , 150mm foam with 0.326mm , 0.376mm , 0.426mm , 0.476mm steel sheet widely use for prefabricated house , construction site , bulidng , warehouse , worker camp , office ect . It is low cost and thermal insulation , waterproof , sound insulation .The fix width of wall panel only has 1150 and 950 mm , 840mm and 1050mm for roof tile , length is no limte but less than 12000mm because of the transportation . The surface metal coat could adopt galvanize aluminum steel sheet , galvanized aluminum zinc color steel sheet and the galvanized color steel sheet .

5. Application

6. About polystyrene foam

Polystyrene foam is green environmental protection, economical and practical; With thermal insulation, heat proof, moisture proof, waterproof and sound insulation , the life span more than 10 years, it is not bad use the polystyrene foam (EPS) sandwich panel for cold storage and clean room except for construction building.