Transportable Workers Accommodation Container Van House Construction
Where there are construction sites, there are workers there!
In order to solve the problem of workers’ accommodation, many construction sites will choose Container Van House
as workers’ dormitories, and they can also be used as offices.
Container Van House has become temporary houses on construction sites in the new era.
They can meet the needs of living and not only have low prices.
In addition to the advantages of mobile and fast construction, it greatly solves the problems of
dirty and poor construction sites and various hidden safety hazards.
The important thing is that it reflects equality and respect for people. Migrant workers also have the right to
live in a solid house that is sheltered from wind and rain, typhoon and earthquake, instead of small tents set up at will.
Why Container Van House Construction?
1. Lower Cost: It requires less money and installation time when compared to traditional buildings.
The maintenance requirement is very low as well.
2. Fast Installation: Our Prefabricated Container House is modular, standard house, each component is similar,
and assembled by bolts and screws.
So it is very easy to install.
3. Easy Removable: When your project is over in one place, you can move them just with a crane or forklift.
Advantages of Container Van House Construction
High cost-effective
Modular production
Durable
Less maintenance
Environment friendly
Less ground foundation
Detail Specifications of Prefabricated Container House
Item | Specification | ||
Part 1: Roof System (roof plate + roof purlin + roof insulation + ceiling) | |||
1 | Roof Plate | Roof tile is 0.5 mm thickness steel sheet; Pre-coated and color coated; | |
2 | Roof Purlin | 1pc 40x80mm Galvanized Square tube + 2pcs 40x60mm Galvanized Square tube + 5pcs 40x80mm Galvanized Square tube; | |
3 | Roof Insulation | 50 mm glass wool insulation material; | |
4 | Ceiling | Ceiling is 0.4 mm thickness shaped steel plate; Pre-coated and color coated; | |
Part 2: Steel Frame (Corner post + column + beam + bolt) | |||
1 | Corner Connection Part | Material: 4 mm Thickness Shaped Steel, surface spray treated by machine after repeatedly polished; Size: 160* 160* 160 mm (Bottom) &160* 160* 180 mm (Top); | |
2 | Column | Material: 2.3mm Thickness galvanized steel structure, surface spray treated by machine after repeatedly polished;
Size: 160* 160* 2480mm; | |
3 | Top and Floor Long Beam | Material: 2.3mm Thickness galvanized steel structure, surface spray treated by machine after repeatedly polished;
Size: 5680* 60* 160 mm; | |
4 | Top & Floor Short Beam | Material: 2.3mm Thickness galvanized steel structure, surface spray treated by machine after repeatedly polished; Size: 2680* 60* 160 mm; | |
5 | Bolt | High strength galvanized steel bolt; To fix the Corner Connection Part and beam, Corner Connection Part and column; | |
Part 3: Floor System (Floor structure + floor panel + floor leather)+Wall Panel | |||
1 | Floor Purlin | Material: 10pcs 40x80mm Galvanized Square tube +4pcs 40x80mm Galvanized Square tube +2pcs 30x50mm Galvanized Square tube; | |
2 | Floor Panel | 18 mm MGO board | |
3 | Wall Panel | 50 mm rock wool sandwich Panel; Outside color is light silver gray (0.38mm thickness steel ); | |
Part 4: Drainage system (Top drainage channel + drain pipe) | |||
1 | Water drain pipe and channel | Water drain pipe: Diameter: 50mm Length: 2700mm; Water drain channel: 90(W)x50(H)mm; | |
Part 5 : Door & window system | |||
1 | Standard Door | Size 1: 930mm*2000mm Material: sandwich panel/steel door; | |
2 | Window | Size 1: 930mm*1200mm Plastic steel single glass sliding window (including screens) With 0.35mm Double glass and strength pvc window frame/Glass Window; Window rail is smooth. | |
Part 6: Electricity System | |||
1 | Lamp | Type: LED energy saving lamp; Power: 24W Include: Two sockets and one switch; Note: The socket will be equipped according to the local standard. Includes: electric wire and conduit; Use: The electric wire will be in the conduit and go through the wall panel for concealed installation. | |
2 | Socket & Switch | ||
3 | Electric Wire | ||
4 | Air Circuit Breaker | ||
Part 7: Internal Decoration | |||
1 | Internal Corner | Material: PVC; Includes: Vertical internal corner and horizontal internal corner. | |
2 | Steel Plate for Internal Connection | Material: Stainless Steel; Used on the joints between two bottom frames when different containers connected with each other. | |
3 | Floor Leather | Material: PVC Thickness: 1.6mm Features: moisture proof; wear resisting; anti-corrosive and thermal insulation. | |
Part 8: Installation Accessories | |||
1 | Sealant | Used for the joints of doors and windows for better waterproof. | |
2 | Structure Adhesive | Used for the reinforcement and seal of the steel frames. | |
3 | Screws | Include: rivets, bolts, drill tail screw; |
On-site Feedback from Our Customer