Feminine Napkin Sanitary Napkin Production Line Full Automatic Long Service Life
Description:
Tri-pieces type structure
1.Hydrophobic N.W. feeding unit
2.Sectioning device adopts electrical sectioning device to cut the hydrophobic N.W. material into two parts, before this device, equipped with wed guider to rectify the material direction automatically
3.After cutting, both sides have bifurcation devices.
Driving System
1.Adopt servo motor and shafts
2.Using universal joint and multistage synchronous wheel to connect servo motor so that can realize synchronize driving
3.Guide Groove embossing, Tri-pieces stand cuff embossing, outline seal embossing, outer cutter, small pouch sealing, all adopt universal joint driving
4.The timing belt was widen to release pressure, using less over-bridge
5.The back side driving door using Q235 steel, equip with air and wind pipe or window.
Specification Parameter:
Design production speed | 1200pcs/min |
Stable production speed | 1000pcs/min |
Centre distance | 205mm (The distance between the material axis and the panel) |
Raw material layout | absorption sheet on top and back sheet on bottom |
Tolerance of product weight | ±1g |
Qualified rate | ≥97% (excluding defectives from hot melt and splicing) |
Efficiency | ≥85% |
Power Supply | 380V 50HZ |
Machine Power | 185KW (excluding hot melt adhesive applicator and air compressor) (for reference only) |
Electrical Power | 380V ±5%, 50HZ; tri-phrase four wires + ground wire |
Air Pressure | 0.6-0.8Mpa (air source should be prepared by buyer) |
Machine Space (L×W×H) | 20m×8m×3.5m (for reference only) |
Our service process :
1.design machine according to customer's demands
2.Agree on the products quality and technology standard
3.Sign the sales service contract
4.Manufacture the product according to the quality standard
5.Conduct installation, adjustment and training
6.Set up customer files, conduct maintenance regularly
7.Follow up the product quality information feedback and improve continuously
Packaging & Shipping
1. Size: According to sanitary napkin production line machine size.
2. Weight: About 40T.
3. Packaging Details: The normal package is wooden box (Machine Size: L*W*H). Using a strong plastic bag to wrap outside of each section, then packing each section by wooden case.
4. Shipping: By sea.
You are welcome to make an enquiry with us.
Contact me, get the latest design and best price!