Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access

Intended primarily for data storage centers the SAS interface is backwards compatible with SATA

This 1 meter long cable uses 28 AWG wires and is intended for external use

Provides point-to-point signal integrity.

Compatible with SAS-to-SATA.

High-speed data transmission line used on server, storage system, disk array and high-speed Internet connections.

Thinner and more flexible cables allow for more efficient and flexible routing.

Connector standard: SFF-8087 and SFF-8484.

Specification:

Connector: SFF-8643 male to U.2 SFF-8639 male + SATA 15 pin female
Data transfer rate up to 2 GB/s (PCI Express rev. 2.0) resp. 4 GB/s (PCI Express rev. 3.0)
Supports NVM Express (NVMe)
Colour: black

This allows the user to mix more expensive lower-capacity SAS drives for applications that require faster data access and higher reliability with lower-cost higher-capacity SATA drives for applications with lower access speed requirements. Monoprice carries a full line of quality SAS cables with connectors for every possible application both internal and external. This 1 meter long cable uses 28 AWG wires and is intended for internal use. It has a single 36-pin SFF-8087 male Mini-SAS plug on one end and a single 32-pin SFF-8484 female SAS connector on the other end.

Note: As with all cables using SFF-8484 connectors this cable is directional and is intended for the SFF-8087 connector to connect to the host and the SFF-8484 to connect to the backplane. Guide to SAS Connectors Type # of Pins Environment SFF-8087 36 Internal SFF-8088 26 External SFF-8482 29 SFF-8484 32 SFF-8470 34 External (also sometimes internal)