Quick Detail

Packaging & Delivery

Repair Guidance:
1. Find out exactly where the leak is. Fill a spray bottle with a mixture of soap and water and
spray it liberally on the bumper ball along the seams. You will notice that the solution starts to
bubble up where the leak is located, so take note of the position of the hole.
2. Prepare the hole for patching. Dry the seam off, and make sure that it is completely deflated before attempting to patch the seam. If you have the patch kit that came with the bumper ball, you can use the prep solution to thoroughly clean the rubber before proceeding. Rubbing alcohol also works.
3. Apply plumber's glue to the seam and let it dry for about 15minutes. If possible, apply some glue to the inside of the seam as well, so that it spreads out and gives an extra layer of protection when the bumper ball pressurizes.
4. Fill the bumper ball about halfway with air and wait another 30 minutes or so to make sure thatthe glue has dried completely.
5. Inflate the item completely and spray it again with the soap and water mixture to make sure that the hole is indeed fixed.


FAQ

Q1. What's the size for the zorb ball?
1.8m, 2m, 2.5m, 3m, etc

Q2. What's the material for the zorb ball?
TPU ,PVC

Q3. What's the difference between the TPU and PVC?
TPU has better quality than PVC:
1, TPU has higher strength and higher tenacity than PVC, so loading weight of TPU can be as heavy as 180kgs but PVC 100kgs;

2, TPU is odorless but PVC smells some kind of acrid especially under hot weather condition, so TPU is more environmentally friendly than PVC;

3, TPU is with high purity and PVC is a mixture, so TPU will keep clear all the time and PVC will fade and become yellow as time passes by,so TPU's lifespan is longer than PVC because of its resistance to oxidation.

More Pictures for bubble ball :