190t Oxford Cloth Inflatable Lighting Decoration Party Inflatable Led Ballon

Product Details:

Details:

1. Production time of Infatable led ballon is about 3 to 7 days .(some regular size is always in stock)

2. We have certificate of UL/CE/SGS certificates.

3. Our payment terms are T/T,paypal

4. Our Package is oxford bag for inflatable led ballon and stong carton

5. It's used for wedding ,party,rental business and event decoration.

6. There is 12 colors could be changed

FAQ:

--DO I NEED A CONSTANT POWER SUPPLY?

All of our inflatables need a continuous power supply.
The exact power requirement for each item is stated in its spec sheet.we will supply the right power requirement fan.

--WHAT DO I GET WHEN I BUY AN INFLATABLE?

* Blower(s) with a safety steel cable
* LED light bulb or strips if requested
* A hanging/ rigging solution/ropes if required. Either with clamps to attach the inflatable to scaffold or trussing, or steel
cables to run to a rigging point
* Sand bags for ballast if required

--CAN I USE AN INFLATABLE OUTSIDE?

Most of our inflatables are suited for inside and outside use, however they need to be carefully secured as described in the
installation instructions. If an item is not suitable it will be mentioned on the item page and on the price list.

--HOW NOISY ARE THE BLOWERS?

We use different types of blowers which range between 70-90db, this is similar to an air-conditioning system. In most large venue this will be barely noticeable. We have installed inflatables at gala dinners, mediation events without issues. In general we advise the public to be at least 3m from the blowers.

--CAN I INSTAL LIGHTS WITH THE INFLATABLE?

The inflatables can be easily illuminated from within and upon request, we can provide internal lighting. LED single light bulb which can be installed on the blower. we can also instal led strips inside the inflatables.

--HOW DO I INSTAL AN INFLATABLE?

Our inflatables are very simple to install. In most cases simply follow the steps below:
* Install the blower in the inflatable
* Attach the blower to the rigging point/ trussing, or place on the ground
* Plug in the blower
* Once inflated make sure the inflatable is secure, tying off extra rigging lines if needed (outside use mainly)
* Done!

Relevant product picture: