Inflatable Christmas Tree Arch with Air Blower for Holiday Decorations

Product Description

How to use and maintain:
1. We kindly suggest that you should open the package carefully, sharp tools may cut the material, then unfold the inflatable equipment on a smooth ground, avoid any sharp objects, rubble and so on, connect the blower and turn on to inflate, normally it takes 8-15 minutes to finish blowing. New products have good density, please leave a small gap when you tie the air output, and do not blow the item too fully especially in summer. Keep 6m far away from fireworks and not use in the rain or snow.
2. When you finish using, please turn off the power and unlock the blower port, remove the blower after the blade stopping completely, then fold the equipment and pack with PVC bag. If the equipment gets wet, just put it in a dry and ventilated place until the water is evaporated.
3. Use a soft towel and soap water to clean the equipment, no hard brush or chemical cleaner, store in -50 ~ +40℃ dry environment. We suggest that you should regularly check and protect against the mouse if the equipment hasn’t been used for a long time.
4. If the equipment is scratched longer than 5cm, please sew the air leak point first, then apply glue evenly on the cloth sample and the position to be repaired, let it dry for 30 seconds, paste the cloth sample to the equipment, flatten it and paste the edge with a little paste. If the scratch is less than 5cm, you could stick directly, no need sewing.

Cautions:

• Do not inflate during storms or strong winds
• Protect fan and power cord from water, fire and severe weather
• Not for use in temperatures below 14 degrees F (or -10 degrees C)
• Not for children under 3 years
• In order to avoid pricking please keep away from sharp tools when inflating

Product Show