Load cell sensor Zemic Nickel plated alloy steel IP66 single point load cell H6F
Bending beam
Suitable for belt, platform and other electronic weighing devices
Maximum platform size:
for 50kg-200kg: 400 x 400 mm
for 250kg-500kg: 600 x 800 mm
for 750kg-2t: 1200 x 1200 mm
Available models | ||
Capacity | Accuracy | Full article description |
100kg | C3 not approved | H6F-C3-100kgkg-3B6 |
150kg | C3not approved | H6F-C3-150kg-3B6 |
200kg | C3not approved | H6F-C3-200kg-3B6 |
250kg | C3 | H6F-C3-250kg-3B6 |
500kg | C3 | H6F-C3-500kg-3B6 |
750kg | C3 | H6F-C3-750kg-3B6 |
1000kg | C3 | H6F-C3-1000kg-3B6 |
2000kg | C3 | H6F-C3-2000kg-3B6 |
Specification | |||||||
Accuracy class | C3 OIML R60 C3 | ||||||
Maximum capacity ( Emax ) | kg | 100/150/200/250 300/500/1000/2000 | |||||
Maximum number of load cell intervals ( nLC ) | 3000 | ||||||
Ratio of minimum LC verification interval Y = Emax / vmin | 10000 | ||||||
Combined error | %FS | ±0.023 | |||||
Output sensitivity ( = FS ) | mV/V | 2.0±0.2 | |||||
Input resistance | Ω | 400±20 | |||||
Output resistance | Ω | 350±3.5 | |||||
Insulation resistance | MΩ | ≥ 5000(50VDC) | |||||
Zero balance | %FS | ≤ ±1.0 | |||||
Compensated temperature | ℃ | -10~+40 | |||||
Operating temperature | ℃ | -35~+65 | |||||
Excitation, recommended voltage | V | 5~12 (DC) | |||||
Excitation maximum | V | 18 (DC) | |||||
Safe overload | %FS | 150 | |||||
Ultimate overload | %FS | 300 | |||||
Corner correction | 0.02%load value/100mm | ||||||
ATEX class( optional ) | II1G Ex ia IIC T4 | II1D Ex iaD20 T73℃ | II3G Ex nL II C T4 | ||||
Ingress protection (according to EN 60529) Stainless steel | |||||||
60529) IP67 Recommended torque on fixation IP67 |