Feature:

Flail tungsten carbide cutter, 8 point–Select ultra-premium, long life flail cutters for your toughest
asphalt and concrete removal projects
Miller tungsten carbide cutter, 6 point –Ultra-premium, high grade tungsten carbide cutter that removes
thick film coatings, thermoplastics, epoxies and tape
DynaCut™ diamond blade, 5 point (single blade) –Ultra-premium, high performance diamond blades for
dry-cut on AC and PCC substrates.
Need to shave, groove, grind, route or plunge-cut? This blade is engineered to provide the longest lasting performance

Concrete Scarifier Milling Machine Tungsten Carbide Cutters With 8 Tooth Points

1) Specification:

• 8 Point Tct Flail Carbide Cutter
• O.D.68MM X I.D.26MM X WIDTH6MM
• High Quality Carbide Steel Body
• Two Times Longer Lasting Tungsten Carbide Tips Than Other Cutters
• Finish: Zinc Place Coating
• Hardness: 46-55 HRC
• Compatible: Scarifying Machines Floor and Planners Multiplane

2) Description:

Xinhe Scarifier cutters can work excellently to remove traffic lines, pavement markings, epoxy, paint, and waterproofing membranes. We use premium quality tungsten carbide for our flail cutters so as to last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters.

We keep a full range of stock for TCT cutters, beam flails ,milling cutters,scabbler bits and other spares for your cutter drums and flail shafts to fit your equipments.

3) Application:

1. Remove markings & rubber | from highways, runways, industrial floors and more.
2. Improve skid resistance | on surfaces such as sidewalks, bike paths, roads and runways.
3. Professional prep tools
4. Striping, pavement, and flooring contractors
5. Asphalt and concrete removal projects
6. Toughest milling removal projects
7. Routing removal projects

Feature:

Flail tungsten carbide cutter, 8 point–Select ultra-premium, long life flail cutters for your toughest
asphalt and concrete removal projects
Miller tungsten carbide cutter, 6 point –Ultra-premium, high grade tungsten carbide cutter that removes
thick film coatings, thermoplastics, epoxies and tape
DynaCut™ diamond blade, 5 point (single blade) –Ultra-premium, high performance diamond blades for
dry-cut on AC and PCC substrates.
Need to shave, groove, grind, route or plunge-cut? This blade is engineered to provide the longest lasting performance

Thank you for the opportunity to working with us and we look forward to offering you with high quality products and best service. If you have any questions, you are welcomed to contact our team any time.