Good Quality New 14.4V Deep Cycle Lithium Ion Sweeper Battery Pack
Type | Li-ion |
Voltage | 14.4V/14.8V |
Capacity | 2600mAh |
Weight | 146.2g / 5.16oz |
Place of Origin | China |
About this item
Please make sure your Shark battery model is RVBAT850 and the connector is 2 prongs. Double check your battery connector before placing order to prevent buying wrong battery. Compatible with Shark Ion AV751, AV752, AV753, AV911S, AV970, RV1000, RV1000S, RV1001, RV1001AE, RV700_N, RV720_N, RV725_N, RV750_N, R75, RV761, RV771, R85, RV850, RV850C, RV850WV, RV850BRN, RV851WV, RV871, RV871C, RV912S, RV913S Robot Vacuum Cleaners (Attention: 2 prongs connector). NOT Compatible with Shark Ion RV700, RV720, RV725, RV 750 Robot Vacuum Cleaners as they are 3 prongs connector. Professional Battery Management System (BMS) provides multiple protections for over charge, over discharge, short circuit, over voltage, over-current and over heat.14.4V/14.8V 2600mAh are same with original voltage and battery capacity. Easy to install, local after sale team guaranteed 7/24 response to online messages, 12 months warranty. Compare with similar items Note: Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
Check your shark battery model is RVBAT850 and the connector is 2 prongs. This battery ONLY fits 2 prongs connector, DOES NOT fit
3 prongs connector.
Compatible with Shark Ion Models:
* AV751, AV752, AV753
* AV911S, AV970
* R75, R85
* RV761, RV771
* RV850, RV850C
* RV850WV, RV850BRN, RV851WV
* RV871, RV871C
* RV912S, RV913S
* RV1000, RV1000S, RV1001, RV1001AE
* RV700_N, RV720_N, RV725_N, RV750_N
ATTENTION
The shark Ion robot series battery has two different connectors: 2 Prong and 3 Prong, this battery only fits 2 prong connector.
To prevent from buying a wrong version battery for your Shark. You Must Check The Connector of you original battery and the model
of your machine. This is very important.
Trouble Shooting Guide
Battery does not hold charge
Sometime the battery protection function is activated due to overload or stuck by furniture. Please turn vacuum power button off
and manually move the vacuum back to charging dock, then turn on power button. If still have problem, contact seller 5Vtek at
listing page.