When the object is caught by laser beam passed through lens, a bright and dark area will be formed on CCD,then the object dimension will be accurately calculated through software analysis and calculation.
DALA TL-2025D can be managed by touch screen,computer and cellphone,like parameter setting ,measurement data management ,and so on,customers can choose as their application request.
Model | TL-2025D | |
---|---|---|
Axis | 2-axis | |
Measurement data | Diameter &Ovality,Width&Thcikness, Lump&Necks | |
Application field | Round wire ,Transparent wire, Flat wire | |
Sampling frequency | 10KHz(signal axis) | |
Measurement range | 0.2~25mm | |
Repeatability(1) | ±0.1μm | |
Measurement accuracy(2) | ±2μm | |
Dimensional | 296*270*54mm | |
Working power | 24V ±10% 40VA | |
Display | LED | |
Communication port | Default:WIFI,RS485 MODBUS RTU,CAN Option:PROFIBUS,PROFINET, EtherNet/IP Industrail bus and Industrial EtherNet,etc. | |
Electrical port | Default:Digital output (relay), Digital input,Analog input encoder pulse input port. Option: PI feedback control(3) | |
Environmental adaptability | Working Environment | 0~50 ℃ |
Working Environment | 20~85%RH(No condensation) | |
Working environmental brightness | Brightness of working environment Incandescent light, fluorescent lamp 3000lx or less | |
Vibrating resistance | 10~55Hz full amplitude 1.5mm in XYZ direction for 2 hours | |
Impact resistance | 10G/6ms | |
Data colletion & analysis | DMS1000 measurement software system,DS14 ZT display and control system | |
Out-of-tolerance alarm | Support | |
Transparent mode | Support | |
Water-proof grade | IP65 |
Note:
(1)Set the average number of times to 1150 and measure the ±2σ value of the round standard rod of diameter 10mm at the measurement area center;
(2)For object diameter of 10mm, the measurement accuracy is ±2um when it moves in the center of 8*8mm;
(3)PI feedback control option shall be ordered at placing device order.