It is a 3G/HD-SDI transmitter and receiver is the low cost transfer device for one way SD/HD/3G-SDI video by single mode and multimode optical fiber cable transfer. SD/HD/3G-SDI transmitter and receiver is designed by digital optical transfer technology, transfer long distance one way SD/HD-SDI video signal, one way reverse 485 control signal on one single mode optical fiber.Support SMPTE292M.SMPTE259M.SMPTE424 signal.m

Features

1.8channels encoded and non-compression broadcast quality video transmissionDirectly compatible with NTSC, PAL, and

2.SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocolsSupport any high-resolution video signal

3.Automatic compatible PAL, NTSC and SECAM video system

4.1-4 channels audio (optional)

5.1-4 channels asynchoronus data (optional)

6.1 port 10/100Mbps ethernet (optional)

7.Power supply and other parameter status indication, which can monitor the operation condition of system

8.Support no-damage regenerative trunk of video

9.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .

10.Industry-grade of operating temperature from -40 to 85 degree , which is applied to the different working environment

11.Hot-swap supportted

12.Stand-alone type or card-type installed in 19 inch 2U or 4U rack-mount chassis.

Typical application

Remark

•The Optical Power Budget fit Multi-mode(62.5/125m),Single-Mode(9/125 m).

•When using 50/125 m multimode fiber, subtract 3 dB from the optical power budget.

•Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

•Maximum transmission distance is also limited by fiber bandwidth.

•Power adapter for stand-alone units is manufactured by third party .Power adapter included US, European, UK or Australian power plug.

•Please feel free to contact factory for any special requirement and customization

Specifications

FAQ

Company Profile