* Product content: Silicone Caulking Tools includes 3 rubber sealant nozzles and 1 rubber scraper tool.
* 3 Different sizes: Silicone Sealant Caulk Nozzle has three models 6.5R, 10R, 13R three different radii. Magic
* 3 Different sizes: Silicone Sealant Caulk Nozzle has three models 6.5R, 10R, 13R three different radii. Magic
caulking tools can meet your different angle and position needs.
* Material content: Caulking Epoxy Piston Nozzle Accessories are made of high-quality silicone material, which can
* Material content: Caulking Epoxy Piston Nozzle Accessories are made of high-quality silicone material, which can
ensure the long-term use of caulking finishing tool.
* Simple operation: There is a caulking finisher on the caulk nozzle. When the sealant flows out, silicone tools can
* Simple operation: There is a caulking finisher on the caulk nozzle. When the sealant flows out, silicone tools can
directly smooth the bathroom sealant to make it smooth, thus saving a lot of time.
* Widely used: The gap filling tool is widely used in window caulk, bathroom, kitchen, door, water tank, sink.
* Widely used: The gap filling tool is widely used in window caulk, bathroom, kitchen, door, water tank, sink.
Decorated floor and glass. Caulk finishing tool can be applied to grout gun,caulk gun, silicon gun and other tools.
Instructions
1. When grout repair kit is used, first clean the work area to remove water and other objects.
1. When grout repair kit is used, first clean the work area to remove water and other objects.
2. After installing silicon on the spray gun. Install the silicone scraper tool.
3. Vertical thin silicon cannon (90 degrees) to ensure the direction of advance.
4. When checking the previous silicon output, control the speed and operation.
5. When working alone, use the back of the caulking nozzle to make it smooth.
6. Overall, the caulk finishing tool can be used separately.
7. After curing, caulk scraper removes the waste.
3. Vertical thin silicon cannon (90 degrees) to ensure the direction of advance.
4. When checking the previous silicon output, control the speed and operation.
5. When working alone, use the back of the caulking nozzle to make it smooth.
6. Overall, the caulk finishing tool can be used separately.
7. After curing, caulk scraper removes the waste.
Detailed Measurement
The Caulk removal tool set comes in three sizes.
6.5 R: 86 mm × 46 mm × 39.4 mm, glue nozzle: 6.3 mm, inner hole: 15 mm;
10 R: 83 mm × 46 mm × 39.4 mm, glue nozzle: 6.3 mm, inner hole: 15 mm;
13 R: 79 mm × 46 mm × 39.4 mm, glue nozzle 6.8 mm, inner hole 15 mm.
The Caulk removal tool set comes in three sizes.
6.5 R: 86 mm × 46 mm × 39.4 mm, glue nozzle: 6.3 mm, inner hole: 15 mm;
10 R: 83 mm × 46 mm × 39.4 mm, glue nozzle: 6.3 mm, inner hole: 15 mm;
13 R: 79 mm × 46 mm × 39.4 mm, glue nozzle 6.8 mm, inner hole 15 mm.
