Seamless Steel Petrochemical & Refinery Pipe ASTM A333 Gr. 6 Material

We are supplying a comprehensive range of ASTM A333 Grade 6 Low Temperature Carbon Steel Pipes for the right technical solution. NEW FORCE provides selection of ASTM A333 Gr. 6 pipes at most reasonable prices as per customer requirements.

1. Standards:
ASTM A333: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

2. Applications of ASTM A333 Grade 6 Seamless Pipes:

1. Refineries
2. Power Plants
3. Boilers
4. Ship Building
5. Heat Exchangers
6. Condensers
7. Paper & Pulp
8. Marine Applications
9. Nuclear Power
10. Fossil Fuel Power Plants

3. Ordering Information

Quantity (feet, centimeters, or number of lengths),

Name of material (seamless pipe),

Grade (Gr.6),

Size (NPS or outside diameter and schedule number of average wall thickness),

Lengths (specific or random),

End finish

Optional requirements

Test report required

4. Chemical Requirements

5. Manufacturing Process

Raw Material Inspection → Cold Centering → Heating → Piercing & Rolling → SIzing → Heat Treatment → Testing → Finishing → NDE → Visual & Dimension Inspection → Marking → Storing & Shipping

6. Mechanical Properties

Tensile Strength, min: 60ksi/415MPa

Yield Strength, min: 35ksi/240MPa

7. Available Size Range

8. Mechanical Testing

Transverse or longitudinal tension test and flattening test, hardness test, or bend test

For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.

For material heat treated by continuous process, tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 pipe.

Hydrostatic test

Impact test – one notched bar impact test, consisting of breaking three specimens shall be made from each heat represented in a heat-treatment load on specimens taken from the finished pipe.