Waste water recycling treatment for effluent water treatment and industrial paint waste water reuse 40m3/h
Typical process flow chart
Technical description about sewage water purification
The wastewater contains both water / liquids and solids impurities of various sorts and origins, sewage purification are designed to remove as much as possible or needed of the solids, other obstructions, and biological and chemical contaminants.
The main pretreatment stages are usually are:
Sewage water purification methods:
Waste water purification for recycling use Sample1 - 100m3/h
Untreated Raw water chemical analysis data
No. | Description | Unit | Value |
1 | Temperature | ℃ | 25 |
2 | PH | 6 - 9 | |
3 | COD(CR) | mg/L | < 100 |
4 | CONDUCTIVITY | µs/cm | < 6000 |
5 | TDS | mg/L | < 3000 |
6 | Chroma | times | < 70 |
7 | SS | mg/L | < 60 |
8 | Turbidity | NTU | < 20NTU |
9 | Fe | mg/L | < 0.03 |
10 | Mn | mg/L | < 0.05 |
11 | Oil | mg/L | <0.05 |
Treated waste water for reuse.
Competitive advantage:
Years of experience and professional engineers in the industry.