Air Powered Diaphragm Pump/ARO Pneumatic Diaphragm Pump for sale, PP/PVDF/Ductile Iron/Cast Steel, Head Pressure: 70 M

Descriptions

The small port diameter: RD25 diaphragm pump, is popular known as double acting diaphragm pump. It's driven by compressor air, are widely used for the large volume transfer of various harshly liquid fluid, such as: chemical, waste water, cement, paper pulpe, syrup, sewage, slurry, honey, paint, oil, petroleum, etc.

Specification

• Dry proof
• High suction capacity
• No electric components
• Discharge outlet with protection
• Solid external sturcture
• Vast compatibility of fluid media
• Reduced internanal volume minimize the waste and easily clean
• Stainless steel bolt are corrosion resistant, and offer you reasonable positioing and conveniently reassemble
• Unique designed three way control valve ensure no block operation, easily parts maintenance, no need lubrication for air pipeline
• Worn resistance parts ensures precisely positioning of stem and fast replacement

Design advantage:

Applications:

FAQ

Comptetitve advantage

The air-driven double diaphragm transfer pumps. No electrical components are required because the pumps are

air-driven. RD series pumps are run-dry safe and self-priming. The pump capacity can be controlled by changing

the pressure in the air supply. The air control is designed for oilfree operation. The RD series pumps are ideally

suited for the transport of liquid chemicals. It transports media at up 6,700 l/h and up to a discharge lift of 70 m.

As the pump capacity is highly dependent on the back pressure, the performance curve must always be observed.

At the sametime, the differential pressure between the hydraulic and pneumatic sides should not exceed 2 bar.

Higher values reduce the service life of the pump. When selecting pumps, check the material compatibility.

In addition, consider the density, viscosity and temperature of the transported medium.