LT-AD01 2D Phased Array Radar + LT-RFS30+ UAV Detection and Positioning Equipment (Optional)
Product Introduction:
The air defense radar produced by our company has a three-coordinate all solid-state fully coherent and active two-dimensional phase scanning system. The working frequencyband is the X-band, and the whole device adopts a modular, all solid-state design to ensurethe reliability of the equipment. The equipment is used for high-speed target detectiontracking, and positioning.in addition to meeting the rigidity and strength indicators, thedesign also takes into account the layout, installation, wiring, cooling and other requirementsof a large number of electronic devices.
The UAV identification and positioning equipment is mainly used to detect and identify all kinds of UAV remote control and image transmission radio signals, and to measure direction and position. It achieves the tracking and marking of UAV trajectories, facilitates the operator to monitor the UAV situation in the protected area, and at the same time has the capability of reconnaissance and early warning, precise identification, black and white lists, the identification between friend or foe in the UAV precise control technology program, and early warning and alarm.
Product Features:
1, Tracking multiple targets at the same time, real-time detection of target speed, trajectory and spatial position.
2, Integration of a variety of anti-strong clutter algorithm.
3, Active phased array antenna to achieve full airspace coverage.
4, The device is small in size, light in weight and all solid-state, with high stability and reliability.
5, The system found that the UAV had an effective range of both near and far, with a monitoring distance of 5,000 meters.
6, Direction finding accuracy≤3°.
7, With UAV and operator tracking capabilities to suit a variety of application environments.
8, Supports both stand-alone and networked (intersection positioning) modes of operation, providing excellent scalability.
9, Supports black and white list recognition of drones, distinguishing between friend and foe for precision strikes.
Parameter Name | Parameter Value |
Radar System | 2D Active Phased Array |
Operating Frequency Band | X Band |
Scanning Range | Azimuth(Electrical Scanning):±15.5° |
Pitch(Electrical Scanning):±30° | |
Azimuth(Mechanical Scanning):0°-360° | |
Pitch(Mechanical Scanning):0°-90° | |
Antenna Speed | ≤10rpm |
Detection Range(Pd=0.8,Pfa=10-6) | ≥8 km (RCS=0.01m²) |
≥15.5km(RCS=0.1m²) | |
≥25km(RCS=1m²) | |
Blind Range | 240m |
Resolution | Range Resolution:15m |
Azimuth Resolution≥5° | |
Pitch Resolution≥9° | |
Accuracy | Range Accuracy≥20m |
Azimuth Accuracy≥0.8° | |
Pitch Accuracy≥0.8° | |
Target Radial Velocity | 0.8m/s-100m/s |
Target Tracking Capability | ≥200 Batches |
Transmit Power | 256W |
Front-end Equipment Size | ≤686mm*411mm*145mm |
Weight | ≤55kg |
Parameter Name | Parameter Value |
Detection Frequency Range | 30MHz-6000MHz |
Focus Bands: 0.4,0.9,1.4,2.4,5.2,5.8GHz | |
Detection Method | Passive Radio Auto-detection, Passive Signal Reception |
Detection Distance | 3km(Range Varies by Model, UAV Transmit Power >0.1W) |
Detection Range | Omnidirectional Detection |
Number of Target Detections | Simultaneous detection of over 20 UAVs |
Simultaneous positioning of over 6 UAVs | |
Accuracy | Direction Finding Accuracy≤1.5° |
Positioning Accuracy≤10m | |
Detection Success Rate | ≥98% |
Detection Response Time | ≤3s |
Size | 215mm*280mm |
Weight | ≤3kg |
Ingress Protection | IP67 |
Usage | 4 or more devices are networked for use |