Baggage scanner Small size 50*30cm tunnel, hotel x-ray baggage scanner SF5030
- Scanner X-Ray for checking parcels and luggage |
- 1x LCD monitor 19’’ |
- 1 x control keyboard equipped with a key-lock |
- 1 x conveyor belt |
- 1x supply electric cable with a minimum lenght of 3 meters |
- 1x speed controller of the conveyor belts |
Size of the tunnel: width = 50cm / Height = 30 cm |
Maximum load of the transporter: up to 100 kg |
Sensor X-ray - Single Energy L-shaped photodiode array detector |
Speed of the convoyer belt : adjustable |
Operating voltage :220-240 Vac + /-10٥/٥ ,50HZ |
lmage performances |
Wire Resolution: 38 AWG minimum |
Penetration Resolution: 10 mm minimum |
Spatial resolution : 1 mm minimum (horizontal and vertical) |
Discrimination of materials |
USB interface |
Contrast: 24 levels of visibility.4096 of gray |
Video Screen: 19 "LCD, color, high resolution, low radiation, ergonomic, auto stabilizer. |
Technical specifications of the generator |
Anode Voltage: 80kv |
Cooling: Sealed oil bath |
Operatig cycle : 100% |
X-Ray Working: <0.1 mrem/h |
2.4. Image processing specification : |
Image processing without stopping the conveyor. |
Full image representation on the monitor, without hatching and distributed over the entire surface of the screen |
Zoom: x64 |
Multi energy image. |
Edge Enhancement |
Black/White Color Viewing |
Variable contrast |
Pseudo-image |
Low and high penetration function. |
Video reversing function. |
Transfer of images on computer and printer |
Black/White Color Viewing |
equipped with a software that allows the detection of explosives, narcotics. |
Manual archiving of pictures |
Automatic archiving of pictures |
Operator Training Program (software which allows to use the Scanner X-Ray as a training terminal without the necessity of parcels and luggage on the conveyor belt) |
Fictitious pictures projection (TIP). |
Suspicious luggage alarm: possibility of acoustic tagging of suspicious luggage |
Standard specifications |
Luggage counter |
Operation counter of the equipment. |
Identification of operators by passwords |
Faults History |
Software for the analysis of the errors. |
Safety Switch on each side of the tunnel which must stop the operation |
Visual signalization when the Scanner X-Ray is started |
The conveyor move forwards and backwards with radioscopic image acquisition |
Environmental specifications |
Storage: (-10 ° C to 50 ° C) minimum. |
Relative Humidity: 95% without condensation. |
Operating Temperature : (-5°C to 45°C) minimum |