Wear Resistant Oilless Wear Plate For Assembly Line Non-Standard Good Load Capacity
1. Product Description
Wear Resistant Oilless Wear Plate For Assembly Line Non-Standard Good Load Capacity based on brass, this product combines the wear resistance of copper alloy (ZCuZn24Al6) and the self-lubricating property of solid lubricant, it can process all kinds of oil groove and oil hole and inset solid lubricant on the friction surface, at the same time, it can adapt to different environmental conditions so that it does not need refueling and maintenance in the process of use.Use standard designation when designing if possible.
2. Specification
Basic material | CuZn25Al6Fe3Mn4 | Dynanic load | 150N/mm² |
Base hardness | HB>250 | Friction Coef | <0.16 |
Temperature Max | 400℃ | Speed limit |
dry 0.25m/s oil 5m/s |
3. Application
Wear Resistant Oilless Wear Plate For Assembly Line Non-Standard are widely used in Automobile production line, injection machine ,moulds etc.
4. Advantages
This oilless wear plate breaks through the general bearing lubrication by oil film limitations.Excellent resisance against chemical atacks and low friction &lowest in friction and good of water lubrication.In the process of use, through the friction heat to make the solid lubrication and shaft friction, the formation of oil, powder co-lubrication excellent conditions, not only protect the shaft from wear, and make the solid lubrication characteristics eternal.Its hardness is higher than average copper sleeve one times, wear-resisting property is also one times.Due to its super high hardness when under high load,it over performs than other common brass material wear plate type.