M8X90mm Rock Wool Pins in Galvanized Steel For Fixing Mineral Board

Description of rock wool pins

___________________________________________________________

Galvanized Steel Rock Wool Pins, also named metal expanded plug, rock wool insulation pins , inculation support and

wall anchor plug. it is made of galvanized steel tube with round washer base. the product techincal is stamped by CNC

machine with mould, then Iron pipe and base riveted together. insulation anchor pins is for fastening rigid insulation to

masonry. It is as simple as drilling straight through the insulation into the masonry and hammer the insulation fixing the

mineralwool for external walls.

Data Sheets of of the Rock Wool Pins

___________________________________________________________

•Material:Galvanized steel in common , and also could be stainless steel
•Base diameter :35mm in common , also could be 30mm

•Pins diameter :8mm

•Pin length:90mm/110mm in common , also could be other length (see the data sheet)
•Surface treatment: galvanized, polish

Application of the Rock Wool Pins

__________________________________________________________________________________

Rock Wool Pins is widely used in the construction and decoration, the anchoring aspect of the wall insulation house. It

consists of galvanized screws, nylon risers and fixed discs. According to the thickness of the insulation layer, it is divided

into various specifications.

According to JG149-2003 external wall insulation standards
Single insulation nail load capacity >0.8KN
Thermal conductivity >0.004

they are suit for concrete, natural stone with dense structure, solid brick, solid sand-lime brick, solid block made from

lightweight concrete, aerated concrete, vertically perforated brick, perforated sand-lime brick etc.

How many rock wool pins in one square meter ?

The number of rock wool pins installed on the outer wall insulation system of the extrusion plate:
the average number for per square meter :

6 rock wool pins for 1-10 layers extrusion plate
7 rock wool pins for 11-20 layers extrusion plate

9 rock wool pins for 21-26 layers extrusion plate

Any single piece larger than 0.1 square meter must be anchored according to shape and site conditions; the density of the

anchor should be increased around the sun's angle, under the mouth and at the edge of the hole. Not more than 300 mm

from the edge of the base. Not less than 60 mm

Approval and Testing Report

____________________________________________________________________________

• CE Approval

• Reaction to Fire test: A1

• Material Inspection certification

• Salt Spray Test

images of galvanized steel insulation anchor pins

____________________________________________________________________

Packaging of the Rock Wool Pins

__________________________________________________________________________

250pcs per carton, and then put the cartons on pallets; and also could be packed as request.