Galvanized Steel Insulation anchor Pins For Mineral Wool Wall Inaulation Board

Description of galvanized steel insulation anchor pins

Galvanized Steel Insulation anchor Pins, also named metal expanded plug, rock wool insulation pins , inculation support and wall anchor plug. it is made of galvanized steel tube with round washer base. the product techincal is stamped by CNC machine with mould, then Iron pipe and base riveted together. insulation anchor pins is for fastening rigid insulation to masonry. It is as simple as drilling straight through the insulation into the masonry and hammer the insulation fixing the mineralwool for external walls.

Detail data of the Galvanized Steel Insulation anchor Pins

Material:Galvanized steel or stainless steel or to be your order
Size (mm) :common type see the following data sheet, specification size, need customer supply drawing with details.
Surface treatment: galvanized, copper plated, polish

Application of the Galvanized Steel Insulation anchor Pins

Galvanized Steel Insulation anchor Pins Widely used in the construction and decoration, the anchoring aspect of the wall insulation house. It consists of galvanized screws, nylon risers and fixed discs. According to the thickness of the insulation layer, it is divided into various specifications.

According to JG149-2003 external wall insulation standards
Single insulation nail load capacity >0.8KN
Thermal conductivity >0.004

they are suit for concrete, natural stone with dense structure, solid brick, solid sand-lime brick, solid block made from light weight concrete, aerated concrete, vertically perforated brick, perforated sand-lime brick etc.

project installation sample:

The number of anchors installed on the outer wall insulation system of the extruded board; the average of 1-10 layers is 6 per square meter, and the average of 11-20 layers is 7 per square meter, 21-26, 9 per square meter. Any single block with an area greater than 0.1 square meter must be anchored, depending on the shape and site conditions; the density of the anchor should be increased around the angle of the sun, under the mouth, and around the edge of the hole. The distance is not more than 300mm, from the edge of the base. Not less than 60mm

Approval and Testing Report

• CE Approval

• Reaction to Fire test: A1

• Material Inspection certification

• Salt Spray Test

images of galvanized steel insulation anchor pins

Packaging of the Galvanized Steel Insulation anchor Pins

__________________________________________________________________________

250pcs per carton, and then put the cartons on pallets; and also could be packed as request.