Aluminum Perforated Screen Facade With Round Hole Or Slot Hole Or Hexagonal Hole

>>> Introduction Of The Perforated Screen Facade

1. Thickness
Thickness of the perforated metal facade panels do not change during the perforation. Normally thickness is expressed in gauge.

However, to avoid possible misunderstanding, we would suggest to express them in inches or millimeters.

2. Width and Length
The most common width and length are as following
1000MM X 2000MM 1220MM X 2440MM 1250MM X 2500MM
1250MM X 6000MM 1500MM X 3000MM 1500MM X 6000MM
we can aslo do other sheet sizes according to customers’ requirements.

3. Margins
Margins are the blank (un-perforated) area along the edges of the sheet. Normally the margin on the length are 20mm minimum, and

margin along the width can be 0 minimum or at customers’ requests.

4. Hole Patterns
Round, Rectangular hole, Square, Triangle, Diamond, Hexagonal, Cross, Slot, and other patterns according to your drawings or

application requirement.

>>> Application Of The Perforated Screen Facade

Perforated Screen Facade With Hexagonal Holes For Audi 4S Shop

Since 2008, AUDI car dealerships shall have a new homogeneous appearance throughout the whole world: the Audi Five Dock

Terminal – a facade of perforated and anodised aluminium sheets with folded edges. It is a hexagonal honeycomb perforation

uniting both aesthetics and dynamics.

Our hexagonal perforated metal sheet provides an extremely high open area of up to 85%. Sheets with holes of this configuration

are very lightweight. The stability of the parent material is of the utmost importance to maintain the shape of a honeycomb structure.

This pattern produces an appealing, timeless design suitable for current and future product applications.

1 Material: We can perforate in Stainless Steel, Alloys, Brass, Mild Steel and Aluminium
2.Hole Diameter: 0.5-10mm
3.Dimension: The most common size for the sheet are as follows:

Perforated Screen Facade With Round Hole For Office Building

This aluminum perforated screen facade make this office brilliant. Nowadays, perforated metal are so popular in architectural

decoration. They are widely used at metal ceiling tiles, building facade, wall cladding, sunshade screen sheet,etc.

Material: aluminum
Ceiling Size: 600*600
Thickness: 0.7mm
Hole diameter: 60mm
Hole distance: 36mm
Edge distance: 30mm
Surface Treatment: Anodized

Other Applications:

• Sunscreens
• Balustrade panels
• Fencing and gate infill panels
• Ceiling panels
• Architectural feature panels
• Building facades
• Acoustic wall panels
• Filters
• Shop fitting wall panels
• Custom perforations

>>> Package And Delivery

1.packing on a pallet and then wrapped with plastic film,
2.wrapped with plastic film then put into wodden cases
3.packaging as the customer's request