Soundproofing Work Insulation Stick Pins with Washer for Glass wooland rock wool

The Insulation Stick Pins with Washer is a insulation hanger, it is fabricated by a 2" X 2" metal base with a tape on the back riveted

with a pin, we also call it as self-adhesive pin or peel&press pin, it works with a self locking washer to fasten the insulation, different

from the perforated base pins, they are used for sticking onto new or clean sheet metal of insulation construction.

Detail Specification Of Insulation Stick Pins with Washer

Material:Low carbon steel, Aluminum or stainless steel.
Plating pin: galvanized coating or cooper plated
Plating base: galvanized coating,
Self-locking washer: Available in all kinds of sizes, shapes and materials
Base size 2"×2"
Pin size :12GA( 2.7mm)
Pins length:1" 1-5/8" 1-1/2" 3-1/2" 4-1/2" 5-1/2" 6-1/2" etc
Accept customization for other lengths

The most popular type is 2.7mmx65mm and 3.0mm x130mm.

The length of the Self Adhesive Insulation Pins also could be customized .

Advantages of the Insulation Stick Pins with Washer

1. Environmentally-friendly

2. Light, dust free, fire retardant and easy to install

3. Heat reflection, heat insulation, sound insulation, counter radiation, counter vibration and shielding

4. During Summer: moisture barrier, sun protection, waterproof, energy saving consumed by cool air conditioning

5. During Winter: heat protection, remarkable energy saving consumed by warm air conditioning

The pins could have washers together

WIPE SURFACE CLEAN.Anchor should be applied to a clean, dry non-porous surface

PEEL OFF RELEASE BACKING.NOTE: Double faced foam tape has a one-year active shelf life

STICK ANCHOR IN PLACE.Select location before contact with surface.Press firmly

APPLY FIRM PRESSURE.20 pounds of pressure should be applied all around the base of the anchor

ALLOW TO STAND 15-20 MINUTES.This will permit better adhesion to take place