Self Adhesive Insulation Hangers are designed to fix insulation materials on smooth surfaces
such as air ducts, attenuators, chambers and enclosures.
Self Adhesive Insulation Hangers is consists of a pin, firmly riveted on a high quality
self-adhesive base.
![]() | |
Material | Galvanized Steel Or Stainless Steel |
Base Plate Shape | Square in common |
Base Plate Size | 50*50mm in common or according to the customer's requirement |
Base Plate Thickness | 0.4mm |
Adhesive Thickness | 1.0mm |
Pin Diameter | 2.7mm or 3mm or 3.4mm in common |
Pin Length | 19mm to 400mm |
Washer Diameter | 25mm, 30mm, 32mm, 38mm, 40mm, 50mm, 60mm, 63.5mm etc. |
Washer Thickness | 0.4-0.5mm |
Advantages | 1. The pins are riveted on the base of the self adhesive insulation hangers, it's very strong. 2. The self adhesive tape on the base botom of the self adhesive insulation hangers is very sticky. 3. The self locking washers are very hard, it could lock the self adhesive insulation hangers very firmly. |
Polyethylene foam with aggresive pressure sensitive rubber resin adhesive.
Service Temperature : -40 deg C to +70 Deg C
Highly Resistant to abrasion, corrosion and moisture.
Confirms to European Directive 2000/53 (Lead, Chromium VI, Mercury, Cadmium free)
10 Minutes 180 degree Peel Adhesion : 30 N/25mm
500 Hour static shear ( Stainless Steel) : 0.8 kg/cm3
1. Install at ambient temperatures above 10° C (preferably between 15 and 25° C)
2. Surfaces should be clean and dry, free of dust, grease, oil and any other loose matter
3. Remove the protective release paper,taking care not to touch the adhesive
4. Place the self adhesive insulation hangers in the required position and press the base against
the surface to be insulated
5. Insulation can be impaled immediately and firmly locked with fastening clips or washers,
but maximum strength of adherence is achieved after 24 hours
6. If necessary, cover the pin with a protective nylon cap
1. We choose the best quality materials for making insulation fasteners |
![]() ![]() |