Product Status | Active | |
Switch Circuit | - | |
Multiplexer/Demultiplexer Circuit | 16:1 | |
Number of Circuits | 1 | |
On-State Resistance (Max) | 5Ohm | |
Channel-to-Channel Matching (ΔRon) | 200mOhm | |
Voltage - Supply, Single (V+) | 3.3V ~ 16V | |
Voltage - Supply, Dual (V±) | ±3.3V ~ 8V | |
Switch Time (Ton, Toff) (Max) | 128ns, 109ns | |
-3db Bandwidth | 22MHz | |
Charge Injection | 33pC | |
Channel Capacitance (CS(off), CD(off)) | 18pF, 240pF | |
Current - Leakage (IS(off)) (Max) | 150pA | |
Crosstalk | -62dB @ 1MHz | |
Operating Temperature | -40°C ~ 125°C (TA) | |
Mounting Type | Surface Mount | |
Package / Case | 28-TSSOP (0.173", 4.40mm Width) | |
Supplier Device Package | 28-TSSOP | |
Base Product Number |
ADG1606BRUZ-REEL7 Overview
As the electronic part is packed in 28-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 16:1. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 28 terminations. Due to its 16 channels, the electrical component produces high-quality output.
Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 28 pins. It consists of 1 circuits. Try searching with ADG1606 to find analog multiplexer variants. Analog switches have 5Ohm internal resistance. Datasheets for functions of 28 pins are available. Multiplexers should not be powered above 16V in normal situations. An effective Dual, Single supply digital multiplexer. It is recommended to use 3.3V as the lowest voltage for the electrical part. The switch device would be able to operate with 300μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. For dual power supplies, a voltage of at least 3.3V should be attached. In this switch multiplexer, there are COMMON OUTPUT outputs available. It can operate from 5V operating voltages. In 22MHz-bandwidths, data can be transferred.
ADG1606BRUZ-REEL7 Features
16 Channels
300μA Supply Current
Bandwidth: 22MHz
ADG1606BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1606BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
Data Acquisition Systems
Fiber In The Loop (FITL)
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
Automotive applications
Battery Powered Systems
SDH/SONET multiplexers
Precision test equipment
Central office
Audio and video switching
Industrial
FEATURES
4.5 Ω typical on resistance
1.1 Ω on resistance flatness
±3.3 V to ±8 V dual supply operation
3.3 V to 16 V single supply operation
No VL supply required
3 V logic-compatible inputs
Rail-to-rail operation
Up to 378 mA of continuous current per channel
28-lead TSSOP and 32-lead, 5 mm × 5 mm LFCSP
Why buy from us >>> Fast / Safely / Conveniently
• SKL is a Stock keeper and trade company of Electronic components .Our branches office include China, Hong Kong, Sigapore , Canada . Offer business, service, resourcing and information for our global member.
• Goods are ensured the highest quality possible and are delivered to our customers all over the world with speed and precision.
How to buy >>>
• Contact us by email & sent your inquire with your Transport destination .
• Online chat, the commissioner would be responded ASAP.
Service >>>
• Forwarder Shipment to world-wide, DHL ,TNT ,UPS,FEDEX etc. buyer don`t need to worry about shipping problem
• We will try to respond as quickly as possible. But due to time zone difference, please allow up to 24 hours to get your mail replied. The products were tested by some devices or software, we ensure that there is no quality problems.
• We are committed to providing fast, convenient and safe transportation service to global buyer.