Air Compression HFO LO Fuel Oil Handling System Supply

Container Type for Land Power Station

Brief Introduction:

This system is integrated into a standard 20 FT HQ and adopts IVS4 mode, that is, a set of auxiliary engines can satisfy the four sets of diesel generator units at the same time.

Container integrated fuel oil supply &booster module, air compression module, and fuel oil separation module. These three modules with their control system are relatively independent.

Container-integrated HFO supply & booster module, diesel emergency supply, and switch, Fuel oil booster,

Light and Heavy oil automatically switching, air Compression, and fuel oil separation module, and also equipped with relatively independent control system.

• HFO supply&booster module
• Diesel emergency supply and switch module
• Fuel oil booster module
• Light and Heavy oil automatically switching module
• Air Compression and fuel oil separation module
• Independent control system
• Besides, equipped with cooling, ventilation, and lighting types of equipment and can meet the requirements of outdoor use (rainproof, etc.)

Module System Formal Diagram

Brief introduction of fuel oil supply & booster module

This module includes heavy oil transportation, filtration, heating, booster, viscosity, and temperature control, light diesel oil emergency booster, and light-heavy oil switch. Meanwhile, it is aimed to ensure the oil viscosity host fed and the pressure required. And starting the diesel oil emergency module while the host fails. When the host starts or stops, it switches to diesel for pipeline and equipment cleaning.

Brief introduction of the air compression module

In this module, the compressor, air dryer, air filter, air bottles, valve fittings, and control system are included. The air compression module is mainly used for diesel engine starting up and is also used in the fuel oil supply module for discharging the self-cleaning recoil filter and in the fuel oil separation module for the pneumatic three-way valve.

Brief introduction of fuel oil separation module

In this module, the fuel oil separator is the core of the heavy oil separation module and will be equipped with corresponding pumps and valves according to the actual requirements of customers. The control system realizes intelligent fully automatic control by PLC display and Siemens program. This module is mainly used to separate the heavy fuel oil in the heavy fuel oil setting tank and pump to the heavy oil daily service tank to supply for fuel oil booster module.

PS: In addition to the three integrated modules in the container, we will also be involved in oil tanks, heavy and light oil transportation, oil processing, and so on.

More Pictures reference: