Falling Film Evaporator For Automatic Centrifuge Filter System

Introduction

Evaporation is the unit operation of concentrated solution. Usually, the solvent is volatile, while the vapor pressure of most solutes approaches zero and cannot be volatile. The process by which a solution is concentrated by removing part of the solvent by vaporization under boiling conditions is called evaporation. In most cases, the evaporator USES steam as the heating medium (usually called heated steam, primary steam or fresh steam). It transfers heat indirectly through the metal wall to the solution. When the solution is heated, the solvent boils and vaporizes.

Application

◎ Single set of capacity up to 200T/H;

◎ Suitable for heat sensitive materials;

◎ Suitable for low concentration, less solid content, low tendency to scale materials.

Features

◎ High heat transfer coefficient, small temperature difference, vacuum evaporation;

◎ Ensure the material in the heat exchange tube in the appropriate boiling state, avoid the phenomenon of dry wall caused by violent vaporization, scale formation;

◎ The boiling temperature loss caused by the liquid column, small circulation, less power consumption.

Characteristics

◎ High heat transfer coefficient, low temperature difference,vacuum evaporation.

◎ Ensure the material keep boiling in the heat exchange tube avoid drying wall and scaling caused by intense evaporation.

◎ Low circulation volume, low power consumption.

Process Flow Chart

Application

Customer Site

Certification

Guarantee

Peony Centrifuge has been dedicated to producing machinery and types of equipment and carrying out facility construction, pursuing the best quality and producing the best product at the same time.
We are committed to rewarding you with better quality in return for our interest in and faith.
We will do our utmost for one more stepping forward, based on our infinite services and trust in customers.

Our service

1. 12 months guarantee period from machine arriving date.

2. Abundant spare parts in stock are available to provide.

3. Our technicians could be dispatched for overseas service.

4. 7*24 hours technical consultation.

5. Your workers could get trained both in our factory and yours.

6. Routine tracing till the machine work properly will be done timely.

7. We will remind you to do the normal maintenance.

8. Your suggestions or any comments & reflection would be treated as a priority.

9. Marketing team will visit you during our visit to your country if you require.

Contact

11000L/H Centrifuge Filter Falling Film Evaporator For Concentrated