Self-Cleaning Diesel Oil Separator Skid Module For Ship Marine Engine
Product Overviews
Module PDSD separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil, and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machines, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove a small number of solid particles from the liquid.
The machine adopts automatic control and has the advantages of high efficiency, low oil consumption, convenient operation, and economic maintenance cost.
The clear oil and dirty water are pumped out by a centripetal pump, the sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for a long time with low vibration, safety, and security.
The design, product, and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.
Module PDSD14000 test running video for your checking: https://youtu.be/hYE3SY3hWJU
Parameters
Model | PDSD14000 | Rated capacity | 0# Diesel oil | L/h | 14000 | 180cst/50℃ | Fuel oil | 8400 | 380cst/50℃ | 7000 | SAE30/40 Lube oil | 7000 | Bowl rotating speed | rpm | 7800 | The output pressure of clear oil | Mpa | ≤0.2 | The output pressure of sewage | Mpa | ≤0.3 | Motor power | kW | 11-15 | Weight(special tools included) | kg | 730 | The full volume of the slag cavity | L | 2 | Discharge Type | Variable discharge | Type of output | Centripetal pump | Dimension of a single machine | L × W × H (mm) | 1200*810*1225 | Oil supply pump Model | ACG045N7NTBP | Flow rate | L/h | 11000 | Bowl rotating speed | rpm | 7800 | Output pressure | Mpa | 0.5 | Motor power | kW | 4kw | Scope supply of each unit NO. | Name | Quantity | Remark | 1 | Separator PDSD14000 | 1 | Ex-proof motor | 2 | Electric control box ASD-W | 1 | Two-in-one | 3 | Ex-proof junction box BF28158 | 1 | | 4 | Oil supply pump ACG045N7NTBP 4KW | 1 | Ex-proof motor | 5 | Steam heater | 1 | | 6 | Check valve DN32 1.6Mpa | 1 | | 7 | Temperature sensor B401 | 1 | | 8 | Pneumatic Three-way valve BURKTER 2002 DN32 | 1 | | 9 | Slag pump 25YW-8-22 1.1Kw | 1 | Ex-proof motor | 10 | Liquid level switch UQK-01-C | 1 | | 11 | Vacuum gauge ZC-60N(-0.1-0MPa) | 1 | | 12 | Pressure gauge YC-60N (0-0.6MPa) | 1 | | 13 | Air pressure-reducing valve YSC YAW-20 | 1 | | 14 | 3/2 solenoid valve Germany Burkert 6014 24VDC | 1 | Ex-proof | 15 | Ball valve Q11F-20T DN15 | 2 | | 16 | Brass filter ball valve Q11F-20T DN25 | 1 | | 17 | Pressure-reducing valve Y12X-16T DN25 | 1 | | 18 | 2/2 solenoid valve Germany Burkert 5281 24VDC | 2 | Ex-proof | 19 | Moisture sensor | 1 | | 20 | Skid (slag box contained) | 1 | | Condition for mineral oil separation and actual capacity (refer to the chart) Oil types | Fuel oil | Lubrication oil | Fuel oil | Heavy fuel oil | SAE30, 40 | Detergence oil | Steam turbine oil | Kinematical viscosity (mm²/s) | 1.9-5.5 | 5.5-24 | 120 | 180 | 380 | 100-120 | 61.2-74.8 | 40°C | 50°C | 40°C | 40°C | Density (kg/m³)(20°C) | < 900 | 900-991 | 880-900 | < 900 | Separating temperature (°C) | Normal temperature, 40-60 best | 90-98 | 80-95 | Recommended capacity (L/h) | 17500 | 14000 | 7700~8400 | 6300~7000 | 4900~5600 | 7000~8400 | 3500~4200 | 11200~11900 | If you have special requirements, please connect with us. | *Reserve the right to change specifications without prior notification. |
Drawing
More Pictures

