YZ71 315 TON 4 Column Hydraulic Press Machine For SMC BMC FRP Composite Material Parts Making

The four-corner leveling system meets the high-precision requirements for large-area thin-walled parts, and the leveling accuracy is ±0.05m.
The hydraulic system uses a piston accumulator, which is 40-60% lower than that of a conventional press.
Complete press mechanical locking safety system and electronic control interlock system.
The composite product is made of unsaturated polyester resin as the matrix fiber reinforced thermosetting composite material, also known as agglomerate molding compound (DMC), which is made by pressing molding technology and is a new type of environmentally friendly cover plate. The composite manhole cover adopts high temperature and high pressure one-time compression molding technology, which has high polymerization degree, high density, good impact resistance and tensile strength, and has the advantages of wear resistance, corrosion resistance, no rust, no pollution and maintenance-free.
FRP, also known as GFRP, is a fiber reinforced plastic, generally referred to as a glass fiber reinforced unsaturated polyester, epoxy resin and phenolic resin matrix. A reinforced plastic made of glass fiber or its products as a reinforcing material, called glass fiber reinforced plastic, or glass fiber reinforced plastic, is distinguished from tempered glass. Because of the variety of resins used, it is called polyester fiberglass, epoxy glass reinforced plastic, and phenolic glass reinforced plastic. Light and hard, non-conductive, stable performance. High mechanical strength, low recycling, corrosion resistance. Machine parts and automobiles, ship casings, etc. can be manufactured instead of steel.

Our ZHHENXI YZ71 315 TON 4 Column Hydraulic Press Machine For SMC BMC FRP Composite Material Parts Making, this series machine can make SMC BMC GMT FRP composite material products.

Application

The composite material product is made of polymer composite material and has no recycling value. After the promotion, the problem of stealing the manhole cover and causing urban black holes will be solved. Unlike the manhole cover on the market, it is pressed out by a hydraulic press and has a high impact strength.
The BMC composite manhole cover is made of glass fiber and resin as the basic material, and is made of auxiliary agent such as curing agent and accelerator. It weighs two-thirds lighter than a cast iron manhole cover and has a service life of more than 20 years, which is twice that of a cast iron manhole cover, and the price is only 80% of the cast iron manhole cover. At the same time, the manhole cover is also insulated and noise-free.
At present, many provinces and cities have replaced the cast iron manhole cover with resin manhole cover because of its light weight, high strength, excellent fatigue resistance, breakage safety, simple molding, low rolling noise, good chemical resistance, good acid and alkali resistance. The appearance is beautiful and so on.

Parameters

Features

• Main frame material: use steel #Q345B to structure the main body of machine instead of common material steel#Q235 in the market. Body Toughness increase 1.5 times than normal machine in the market.

• Structure: Fitted with calibration valve and a three position driven distributer, complete with oil and capstan for hoisting worktable. 4 post type structure, simple, economic and practical.

• Drive mode: The hydraulic press are driven by motor. Independent of the electric control system, reliable operation.

• After-sale service:

• during warranty ZHENGXI will take full responsibility of customer’s machine, ANY parts have problem ZHENGXI will send new FREE replacement to customer, the freight of replacement are also covered by ZHENGXI.

• Door-to-door service are payable and optional to be provide for installation, commissioning, maintains, training purpose. Charge of door-to-door service will be given in next stage.

• Technical support by email, phone or video call are FREE and lifetime available.