200T Energy Saving Servo Motor Powder Products Hydraulic Press Machine belongs to ZHENGXI Yz27 series which mainly be used on powder forming technology.

Application

ZHENGXI 200T Energy Saving Servo Motor Powder Products Hydraulic Press Machine is mainly used for powder compaction, sheet forming, powder metallurgy, etc. The biggest characteristics of this machine are uniform force, floating demoulding, very low rejection rate; servo closed-loop control, high precision, automatic demoulding, automatic powder filling, easy operation, safety and reliability, widely used.

Parameters of 200T Energy Saving Servo Motor Powder Products Hydraulic Press Machine

Application Environment

• Working temperature: 0-50 C

• Relative humidity: not more than 50%

• Power supply voltage: AC380V + 10%, 50Hz + 5% three-phase five-phase system. Good grounding wire, grounding resistance < 2Ω, diameter not less than 100 mm2.

• Hydraulic system medium: YB-N46# anti-wear hydraulic oil

• Total power: about 23 KW.

Daily Production Output

Press 16 products in one mold, >3 cycles times per minute

​Structure of Machine

The machine is composed of five parts: main engine, hydraulic system, die frame, control mechanism and feeding mechanism. The main engine includes fuselage, pillar, cylinder, frame, etc. Hydraulic system includes servo motor, oil pump, valve block, valve, pipeline, etc. The control mechanism includes limit device, pipeline and electric control box, etc. The electrical system is located on the right side of the main engine, connecting the tubing and wire into a whole, and realizing the whole operation procedure.

This machine has three operation modes: slightly moving, semi-automatic and automatic. Pressure and position can be adjusted within a certain range. Servo motors, oil pumps and valves are placed on the top of the fuel tank. Independent control cabinets and operation consoles are used for electronic control. The main cylinder block is fixed on the upper beam by means of the shoulder and mother of the cylinder head. The lower end of the piston rod is machined with threads connected with the die frame.

The color of the equipment is beige (can be customized according to the requirements of Customer, and the color card number should be provided). The structure and function of each part are as follows: