Yuken Solenoid Valve DSG-01-2B2-A100-70 or DSG012B2A10070

DSG-01-2B2-A100-70

Product Description

Brand: YUKEN

Model Number: DSG-01-2B2-A100-70 or DSG012B2A10070

Product Name:Oil research solenoid valve

Product Alias: Oil research, hydraulic valves, solenoid valves, valve

Material: Stainless steel

Type (channel position): Direct acting

Working temperature: room temperature

Parts and Accessories: Coils

Drive mode: Electromagnetic

Form: Butterfly

Pressure environment pressure

Uses: Commutation

Standard: Japanese standard

Connection form: thread

Applicable medium: oil

Product General Knowledge

YUKEN solenoid valve is used to control the direction of fluid automation basic components, are actuators; usually used in mechanical control and industrial valves above, the media control, so as to achieve the control of the valve switch.

working principle

Solenoid valve has a closed cavity, open in different locations through-hole, each hole leads to a different tubing, the middle of the valve is a valve, on both sides of the two electromagnets, which side of the magnet coil body valve will be attracted to Which side, by controlling the movement of the valve body to block or leak different drain holes, and the inlet hole is normally open, the hydraulic oil will enter the different drain pipe, and then through the oil pressure to promote the cylinder piston, The piston drives the piston rod, the piston rod drives the mechanical device to move. This controls the mechanical movement by controlling the electromagnet current.

Direct-acting solenoid valve

Principle: When power is on, the electromagnetic coil generates electromagnetic force to lift the closing piece from the valve seat and the valve opens. When the electric power is off, the electromagnetic force disappears. The spring presses the closing piece on the valve seat and the valve closes.

Features: In vacuum, negative pressure, zero pressure can work normally, but the path generally does not exceed 25mm