GE IC693APU302 2-axis positioning module (APM) 24-pin I/O connector 3 feet/ 1 meter

Product information GE IC693APU302 :

The IC693APU302 can operate either in follower or standard mode. In follower mode, the module delivers high performance “electronic gearing,” which comes in handy for slave-master applications. The user can select a preferred mode in the configuration software.

The axis positioning module can be accommodated by any CPU or remote baseplate in the 90-30 series. There are three APM modules for CPU’s which are embedded – (311, 313 or 323). For CPUs which are 331 or higher, eight modules are present in one system with a max of three in every baseplate. A maximum of 10 motion programs can be created and stored in the APM module. For the configuration of the APM modules, Versa Pro software version 1.1 or later is used.

APM cables are comprised of a 24-pin I/O connector, a cable, and a 25-pin D-type terminal block connector. Examples of these cables include IC693CBL311 which measures 10 feet/3 meters; IC693CBL319 which measures 3 feet/ 1 meter; IC693CBL317 which measures 10 feet/3 meters with an 8” external shield pigtail; and C693CBL320 which measures 3 feet/1 meters with an 8” external shield pigtail.

A 24-pin I/O cable is used for building custom length cables and comes in three different kits: crimp wire receptacle, solder eyelet receptacle, and IDC (ribbon) receptacle.

The IC693APU302 Axis Positioning Module can be configured and programmed by using VersaPro Software or Logic developer-PLC software. The load requirement of the module is 800 milliamps of current at +5 Volts DC voltage. It comes with a 24-pin high-density connector. This module is suitable to operate in the standard mode and in the follower mode.

When operating in the follower mode, it offers high-performance electronic gearing facilities for master/slave applications. Its motion configuration software offers a user interface for controlling and monitoring the system effectively. It also offers generic programming commands such as velocity, forward, move, and acceleration/deceleration commands. Its flash memory can store up to 10 programs and 40 subroutines. The APM front panel faceplate has two 24-pin high-density connectors for servo connections. The IC693APU302 Motion Mate Axis Positioning Module can be used in servo control applications for very precise motion control.

Series 90 -30 PLCs

GE Intelligent Platforms’ Series 90*-30 PLCs is a family of controllers, I/O systems and specialty modules designed to meet the demand for versatile industrial solutions — helping businesses gain a sustainable advantage. With its single overall control architecture, the Series 90-30 has been the PLC of record in over 200,000 applications such as highspeed packaging, material handling, complex motion control, water treatment, continuous emissions monitoring, mining, food processing, elevator control, injection molding and many more.

Our brand: