GE IC693CPU311 16-bit system belonging to the 90-30 series of PLCs 10 MHz and a registry memory of 1 kilobyte
Product information GE IC693CPU311 :
Embedded CPUs have the following properties: The CPU type cannot be changed as it is soldered onto the backplane board in the baseplate. Embedded CPUs do not have a time-of-day clock. Since they lack expansion connectors like modular baseplates do, they do not support expansion or remote racks. If power supply is removed or battery disconnected, the CPU has “super” capacitors that store sufficient charge to maintain memory circuits for a while.
It uses a IC693PWR330 high capacity power supply which is connected to an AS693232 SNP serial cable. The IC693PWR330 power supply has a load capacity of 30 Watts output and delivers 120/240 VAC input or 125 VDC output. To test the IC693CPU311, power it on and check for the ‘OK’ light from the LED indicator located at the top of the power supply. If the ‘OK’ indicator fails to come ON, you should know that there’s a problem with the module’s CPU.
More information:
CPU Type | 5-slot baseplate with embedded CPU |
Total Baseplates per System | 1 |
Load Required from Power Supply | 410 milliamps from +5 VDC supply |
Processor Speed | 10 MegaHertz |
Processor Type | 80188 |
Operating Temperature | 0 to 60 degrees C (32 to 140 degrees F) ambient |
Typical Scan Rate | 18 milliseconds per 1K of logic (boolean contacts) |
User Program Memory (maximum) | 6K Bytes |
Discrete Input Points - %I Discrete Output Points - %Q | 160 (maximum - combined inputs + outputs) 160 (maximum - combined outputs + inputs) |
Discrete Global Memory - %G | 1280 bits |
Internal Coils - %M | 1024 bits |
Output (Temporary) Coils - %T | 256 bits |
System Status References - %S | 128 bits (%S, %SA, %SB, %SC - 32 bits each) |
Register Memory - %R | 512 words |
Analog Inputs - %AI | 64 words |
Analog Outputs - %AQ | 32 words |
System Registers (for reference table viewing only; cannot be referenced in user logic program) | 16 words (%SR) |
Timers/Counters | 170 |
Shift Registers | yes |
Built-in Serial Ports | 1 (uses connector on PLC power supply). Supports SNP slave and SNP-X slave protocols. |
Communications | LAN - Supports multidrop. Also supports Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules. |
Override | no |
Battery Backed Clock | no |
Interrupts | no |
Type of Memory Storage | RAM and optional EPROM or EEPROM |
PCM/CCM Compatibility | no |
IC694MDL230 | 120 VAC Isolated Input (8 Points) |
IC694MDL231 | 240 VAC Isolated Input (8 Points) |
IC694MDL240 | 120 VAC Input (16 Points) |
IC694MDL241 | 24 VAC/VDC Input (16 Points) |
IC694MDL250 | 120 VAC Isolated Input (16 Points) |
IC694MDL260 | 120 VAC Input (32 Points)** |
IC694MDL632 | 125 VDC Input (8 Points) |
IC694MDL634 | 24 VDC Input, Neg/Pos Logic (8 Points) |
IC694MDL645 | 24 VDC Input, Neg/Pos Logic (16 Points) |
IC694MDL646 | 24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points) |
IC694MDL654 | 5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points) |
IC694MDL655 | 24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points) |
IC694MDL660 | 24 VDC Input (32 Points)** |
IC694ACC300 | Input Simulator Module (8 Points) |
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.