ATV630D55N4 Schneider variable speed drive can feed 3-phase synchronous and asynchronous power motors

Quick Details

Range of Product
Altivar Process ATV600
Product or Component Type
Variable speed drive
Product Specific Application
Process and utilities
device short name
ATV630
Variant
Standard version
Product destination
Asynchronous motors
Synchronous motors
EMC filter
Integrated 492.13 ft (150 m) EN/IEC 61800-3 category C3
IP degree of protection
IP21IEC 61800-5-1
IP21IEC 60529
[Us] rated supply voltage
380...480 V
Degree of protection
UL type 1 UL 508C
Type of cooling
Forced convection
Supply frequency
50...60 Hz - 5...5 %
[Us] rated supply voltage
380...480 V - 15...10 %
Motor power kW
55 kW normal duty)
45 kW heavy duty)
Maximum Horse Power Rating
75 hp normal duty
60 hp heavy duty
Line current
97.2 A 380 V normal duty)
84.2 A 480 V normal duty)
81.4 A 380 V heavy duty)
71.8 A 480 V heavy duty)
Prospective line Isc
50 kA
Apparent power
70 kVA 480 V normal duty)
59.7 kVA 480 V heavy duty)
Continuous output current
106 A 2.5 kHz normal duty
88 A 2.5 kHz heavy duty
Asynchronous motor control profile
Constant torque standard
Variable torque standard
Optimized torque mode
Synchronous motor control profile
Permanent magnet motor
Synchronous reluctance motor
Speed drive output frequency
0.1…500 Hz
Nominal switching frequency
2.5 kHz
Switching frequency
2.5...8 kHz with derating factor
2...8 kHz adjustable
Safety function
STO (safe torque off) SIL 3
Discrete input logic
16 preset speeds
Communication Port Protocol
Ethernet
Modbus serial
Modbus TCP
Option card
Slot A communication module, Profibus DP V1
Slot A communication module, PROFINET
Slot A communication module, DeviceNet
Slot A communication module, Modbus TCP/EtherNet/IP
Slot A communication module, CANopen daisy chain RJ45
Slot A communication module, CANopen SUB-D 9
Slot A communication module, CANopen screw terminals
Slot A/slot B digital and analog I/O extension module
Slot A/slot B output relay extension module
Slot A communication module, Ethernet IP/Modbus TCP/MD-Link
communication module, BACnet MS/TP
communication module, Ethernet Powerlink
Complementary
Mounting Mode
Wall mount
Maximum transient current
116.6 A 60 s normal duty)
132 A 60 s heavy duty)
Phase
3 phase
Discrete output number
0
Discrete output type
Relay outputs R1A, R1B, R1C 250 V AC 3000 mA
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
Output voltage
<= power supply voltage
Permissible temporary current boost
1.1 x In 60 s normal duty)
1.5 x In 60 s heavy duty)
Motor slip compensation
Not available in permanent magnet motor law
Can be suppressed
Automatic whatever the load
Adjustable
Acceleration and deceleration ramps
Linear adjustable separately from 0.01...9999 s
Physical interface
Ethernet
2-wire RS 485
Braking to standstill
By DC injection
Protection type
Thermal protection motor
Safe torque off motor
Motor phase break motor
Thermal protection drive
Safe torque off drive
Overheating drive
Overcurrent between output phases and earth drive
Overload of output voltage drive
Short-circuit protection drive
Motor phase break drive
Overvoltages on the DC bus drive
Line supply overvoltage drive
Line supply undervoltage drive
Line supply phase loss drive
Overspeed drive
Break on the control circuit drive
Transmission Rate
10, 100 Mbits
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Frequency resolution
Display unit 0.1 Hz
Analog input 0.012/50 Hz
Transmission frame
RTU
Electrical connection
Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16
Line side screw terminal 70...120 mm² AWG 1/0...250 kcmil
Motor screw terminal 70...120 mm² AWG 1/0...250 kcmil
Connector type
RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
RJ45 on the remote graphic terminal)Modbus serial
Data format
8 bits, configurable odd, even or no parity
Type of polarization
No impedance
Exchange mode
Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Number of addresses
1…247 Modbus serial
Method of access
Slave Modbus TCP
Supply
External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection
Internal supply for digital inputs and STO 24 V DC 21…27 V), <200 mA overload and short-circuit protection
Local signalling
For local diagnostic 3 LEDs
for embedded communication status 3 LEDs (dual colour)
for communication module status 4 LEDs (dual colour)
for presence of voltage 1 LED (red)
Width
11.42 in (290 mm)
Height
36.30 in (922 mm)
Depth
12.72 in (323 mm)
Product Weight
124.56 lb(US) (56.5 kg)
Analogue input number
3
Analogue input type
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits
AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits
AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits
Discrete input number
8
Discrete input type
DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V)
Input compatibility
DI1...DI6 discrete input level 1 PLC EN/IEC 61131-2
DI5, DI6 discrete input level 1 PLC IEC 65A-68
STOA, STOB discrete input level 1 PLC EN/IEC 61131-2
Discrete input logic
Positive logic (source) DI1...DI8), < 5 V, > 11 V
Negative logic (sink) DI1...DI8), > 16 V, < 10 V
Analogue output number
2
Analogue output type
Software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits
Software-configurable current AQ1, AQ2 0...20 mA 10 bits
Software-configurable current DQ-, DQ+ 30 V DC
Software-configurable current DQ-, DQ+ 100 mA
Sampling duration
2 ms +/- 0.5 ms DI1...DI4) - discrete input
5 ms +/- 1 ms DI5, DI6) - discrete input
5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input
10 ms +/- 1 ms AO1) - analog output
Accuracy
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Linearity error
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input
AO1, AO2 +/- 0.2 % analog output
Relay output number
3
Relay output type
Configurable relay logic R1 fault relay NO/NC 100000 cycles
Configurable relay logic R2 sequence relay NO 100000 cycles
Configurable relay logic R3 sequence relay NO 100000 cycles
Refresh time
Relay output R1, R2, R3)5 ms +/- 0.5 ms)
Minimum switching current
Relay output R1, R2, R3 5 mA 24 V DC
Maximum switching current
Relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC
Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC
Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC
Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC
Isolation
Between power and control terminals
Maximum output frequency
500 kHz
Maximum Input Current per Phase
97.2 A
Variable speed drive application selection
Building - HVAC compressor centrifugal
Food and beverage processing other application
Mining mineral and metal fan
Mining mineral and metal pump
Oil and gas fan
Water and waste water other application
Building - HVAC screw compressor
Food and beverage processing pump
Food and beverage processing fan
Food and beverage processing atomization
Oil and gas electro submersible pump (ESP)
Oil and gas water injection pump
Oil and gas jet fuel pump
Oil and gas compressor for refinery
Water and waste water centrifuge pump
Water and waste water positive displacement pump
Water and waste water electro submersible pump (ESP)
Water and waste water screw pump
Water and waste water lobe compressor
Water and waste water screw compressor
Water and waste water compressor centrifugal
Water and waste water fan
Water and waste water conveyor
Water and waste water mixer
Motor power range AC-3
55…100 kW 380…440 V 3 phase
55…100 kW 480…500 V 3 phase
Quantity per Set
1
Enclosure mounting
Wall mounted
Environment
Insulation resistance
> 1 MOhm 500 V DC for 1 minute to earth
Noise level
62.4 dB 86/188/EEC
Power dissipation in W
Natural convection 131 W 380 V 2.5 kHz
Forced convection 917 W 380 V 2.5 kHz
Volume of cooling air
77932.15 Gal/hr(US) (295 m3/h)
Operating position
Vertical +/- 10 degree
Maximum THDI
<48 % from 80...100 % of load IEC 61000-3-12
Electromagnetic compatibility
Electrostatic discharge immunity test level 3 IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
Conducted radio-frequency immunity test level 3 IEC 61000-4-6
Pollution degree
2 EN/IEC 61800-5-1
Vibration resistance
1.5 mm peak to peak 2…13 Hz)IEC 60068-2-6
1 gn 13…200 Hz)IEC 60068-2-6
Shock resistance
15 gn 11 ms IEC 60068-2-27
Relative humidity
5…95 % without condensation IEC 60068-2-3
Ambient air temperature for operation
5…122 °F (-15…50 °C) without derating)
122…140 °F (50…60 °C) with derating factor)
Ambient Air Temperature for Storage
-40…158 °F (-40…70 °C)
Operating altitude
<= 3280.84 ft (1000 m) without derating
1000...4800 m with current derating 1 % per 100 m
Product Certifications
CSA
UL
DNV-GL
ATEX INERIS
ATEX zone 2/22
TÜV
marking
CE
Standards
UL 508C
EN/IEC 61800-3
EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
Overvoltage category
III
Regulation loop
Adjustable PID regulator
Noise level
62.4 dB
Pollution degree
2
Ordering and shipping details
Category
22207-ATV630 FRAMES 5 & 6
Discount Schedule
CP4E
GTIN
3606480701443
Returnability
Yes
Country of origin
IN
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
18.50 in (47.0 cm)
Package 1 Width
16.93 in (43.0 cm)
Package 1 Length
43.31 in (110.0 cm)
Package 1 Weight
141.10 lb(US) (64.0 kg)

OTHER SUPERIOR PRODUCTS

This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It features 3 built-in RJ45 communication ports as standard, 1 Ethernet port, 2 serial ports. It works at a rated supply voltage from 380V to 480V AC. This drive provides up to 30% energy saving when on standby due to the innovative ‘‘Stop and Go’’operation without additional costs. It is suitable for motors with power rating up to 55kW / 75hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 45kW / 60hp for applications requiring significant overload (up to 150%). It weighs 56.5kg and its dimensions are, 290mm wide, 922mm high, 323mm deep. This drive is focused on fluids management processing and energy saving, it offers extensive flexibility in water and wastewater, mining, minerals and metals, oil and gas and food and beverage applications. Accessories (fan kit, graphic display terminal) and options (I/O expansion modules, communication modules, EMC input filters) are available with Altivar Process ATV600 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a wall. This new concept of drives meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting the energy management, asset management and also the overall performance of the process.

FAQ

Q1. What about the lead time?

A: 3-5 days for Sample preparing ,8-10 working days for mass production.

Q2. Do you have any MOQ limit of Industrial Servo Drives?

A: Low MOQ, 1pc is available.

Q3. How do you ship the goods and how long does it take to arrive?

A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.