(note 1) the characteristics of LCD panels include bright spots (always on) and dark spots (not on). Due to the large number of display elements in LCD panels, it is impossible to prevent 100% of the generation of bright and black spots. In addition, individual differences in LCD panels may cause differences in color tones, uneven brightness, and flickering. Please note that these are characteristics, not defects or faults of the product.

(note 2) by using the screen save/backlight OFF function of GOT, it is possible to prevent burn-in of the display part and extend the life of the backlight.

(note 3) memory is a ROM that can overwrite new data without erasing the written data.

(note 4) when installing the USB environmental resistant cover, it supports IP67F by firmly pressing the delta mark on the cover. (when connecting a USB cable or a USB memory, the USB interface becomes IP2X.) However, we do not guarantee all of your environment. Also, it may not be used in environments that are affected by oil and chemicals for a long time, or environments filled with oil mist.

(note 5) when multiple expansion units, barcode readers and RFID controllers are used, the total current values used by the expansion units, barcode readers and RFID controllers must be within the current values that can be supplied by the GOT There is.
Please refer to the manual below for current values to use the expansion unit, barcode reader, RFID controller, and current values to which the GOT can be supplied.
・ GOT1000 series connection manual corresponding to the connected device used compatible with GT Works3
Gt Designer2 Version screen design manual 2.8 multi-channel function

(note 6) when using a stylus pen, use one that meets the following specifications.
・ material: polyacetal resin ・ tip radius: 0.8mm or more

(note 7) if the operating ambient temperature is not 25°C, the error may increase.

(note 8) when a stylus pen is used, the operation force is 0.98 N or less.
Since the touch panel is a consumable product due to its structure, it may become unusable depending on the usage method and usage environment even if it is less than the above number of times.

(note 12) 2.1kg with functional version C or earlier

(note 13) if the functional version is G or earlier, the following is the information.
Display Angle: 88 degrees up and down, left and right
Display life: approximately 43,000 hours (ambient temperature 25°C)
Backlight: cold cathode tube (interchangeable)
Backlight life: approximately 50,000 hours or more

(note 15) the display unit is an analog resistive film type. When you press two or more points on the display at the same time, if there is a switch near the center of the pressed point, the switch may operate. Do not press more than two points on the touch panel at the same time.