AB 1606-XLS960E-3 Power Supply Switched Mode 960W Output 24-28 Output Voltage 3P
About 1606-XLS960E-3 :
The 1606-XLE supplies are cost optimized power supplies without compromising quality, reliability and performance. The 1606-XLE120E is part of the XLE power supply family, existing alongside the high featured XLS family.
The 1606-XLE includes all the essential basic functions and the devices have a power reserve of 20%. This extra current may even be used continuously at temperatures up to +45°C. The most important features are the small size, the high efficiency and the wide temperature range. The Auto-select input makes worldwide installation and usage very simple. Defects or system failures caused by wrongly set switches can not occur.
Bulletin 1606-:
Quick mounting and connecting, innovative DIN-Rail mount, smallest
in class
UL Listed NEC Class 2; Class 1, Div. 2; Semi F47; ODVA Approved
Low inrush current limiting
PFC Active or Passive
Wide range input; auto select input
Superior overload design (continuous current, no hiccup)
NEC Class 2 'Limited Power' options
Selectable operating mode (single/parallel)
Superior efficiency and temperature rating
Instructions:
a) Use appropriate copper cables that are designed for an operating temperature of: 60°C for ambient up to 45°C and 75°C for ambient up to 60°C minimum.
b) Follow national installation codes and installation regulations!
c) Ensure that all strands of a stranded wire enter the terminal connection!
d) Up to two stranded wires with the same cross section are permitted in one connection point (except PE wire).
e) Do not use the unit without PE connection.
1606-XLE120E & 1606-XLE120EC 24V, 5A; Single Phase Input
Instructions for two phase operation:
a) A phase to phase connection is allowed as long as the supplying voltage is below 240V(+10%).
b) Use a fuse or a circuit breaker to protect the N input. The N input is internally not protected and is in this case connected to a hot wire
Adisadvantages:
a. The faulty power supply can not be recognized. The green LED will still be on since it is reverse-powered from the other power supply.
b. It does not cover failures such as an internal short circuit in the secondary side of the power supply. In such a - virtually nearly impossible - case, the defective unit becomes a load for the other power supplies and the output voltage can not be maintained any more.
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.