AB 1606-XLE240E 380-480VAC Three Phase Input 24-28VDC Output 240 Watt 10 Amp
About 1606-XLE240E :

The 1606-XLE power supplies are cost optimized power supplies without compromising quality, reliability and performance.
The 1606-XLE240E is part of the XLE power supply family, existing alongside the high featured XLS family The 1606-XLE includes all the essential basic functions and the devices have a power reserve of 20%.
This extra current may even be used continuously at temperatures up to +45°C. The most important features are the small size, the high efficiency and the wide temperature range. The Auto-select input makes worldwide installation and usage very simple. Defects or system failures caused by wrongly set switches can not occur.
Please note:
A power supply has to comply with EN 61000-3-2 (Standard for harmonic input current) when:
1) the end-device is used within the European Union and
2) the end-device is connected to a public mains supply with a nominal voltage ≥ 220Vac and
3) the power supply is: - fitted in an end-device with an average input power in excess of 75W or - fitted in an end-device with a continuous input power in excess of 75W or - part of a lighting system.
Instructions:
a) Use appropriate copper cables that are designed for an operating temperature of: 60°C for ambient up to 45°C and 75°C for ambient up to 60°C minimum.
b) Follow national installation codes and installation regulations!
c) Ensure that all strands of a stranded wire enter the terminal connection!
d) Up to two stranded wires with the same cross section are permitted in one connection point (except PE wire). e) Do not use the unit without PE connection.

• Ultra-small size
• Extra-low inrush current
• Active power factor correction
• Wide range AC/DC input; auto select input
• Superior reserve power (can support 150% rated power for five seconds)
• Superior efficiency and temperature rating
• DC-OK and overload LED

1606-XLE120E & 1606-XLE120EC 24V, 5A; Single Phase Input
Above an average output current of 2.7A, the harmonic current standard EN61000-3-2 is not fulfilled.
Please note:
A power supply has to comply with EN 61000-3-2 (Standard for harmonic input current) when:
1) the end-device is used within the European Union and
2) the end-device is connected to a public mains supply with a nominal voltage ≥ 220Vac and
3) the power supply is:
- fitted in an end-device with an average input power in excess of 75W or
- fitted in an end-device with a continuous input power in excess of 75W or
- part of a lighting system.

Another module:
SLC 500 Digital I/O Modules Input Catalog Numbers
1746-IA4, 1746-IA8, 1746-IA16, 1746-IB8, 1746-IB16, 1746-IC16, 1746-IG16, 1746-IH16, 1746-IM4, 1746-IM8, 1746-IM16, 1746-IN16, 1746-ITB16, 1746-ITV16, 1746-IV8, 1746-IV16
Output Catalog Numbers
1746-OA8, 1746-OA16, 1746-OAP12, 1746-OB8, 1746-OB6EI, 1746-OB16, 1746-OB16E, 1746-OBP8, 1746-OBP16, 1746-OG16, 1746-OV8, 1746-OV16, 1746-OVP16, 1746-OW4, 1746-OW8, 1746-OW16, 1746-OX8
Combination Input/Output Catalog Numbers
1746-IO4, 1746-IO8, 1746-IO12, 1746-IO12DC

Our brand: